High-Performance SAW Resonator with Spurious Mode Suppression Using Hexagonal Weighted Electrode Structure
Sensors · 18.12.2023 · 23 (24) · 9895
DOI: 10.3390/s23249895 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 18.12.2023. Verfasst von Yulong Liu und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory for Electronic Measurement Technology, Key Laboratory of Instrumentation Science and Dynamic Measurement, Ministry of Educati…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Program Shanxi Province, Shanxi '1331 Project' Key Subject Construction, Fundamental Research Program, Shanxi Province.
Abstract (Originalsprache)
Surface acoustic wave resonators are widely applied in electronics, communication, and other engineering fields. However, the spurious modes generally present in resonators can cause deterioration in device performance. Therefore, this paper proposes a hexagonal weighted structure to suppress them. With the construction of a finite element resonator model, the parameters of the interdigital transducer (IDT) and the area of the dummy finger weighting are determined. The spurious waves are confined within the dummy finger area, whereas the main mode is less affected by this structure. To verify the suppression effect of the simulation, resonators with conventional and hexagonal weighted structures are fabricated using the micro-electromechanical systems (MEMS) process. After the S-parameter test of the prepared resonators, the hexagonal weighted resonators achieve a high level of spurious mode suppression. Their properties are superior to those of the conventional structure, with a higher Q value (10,406), a higher minimum return loss (25.7 dB), and a lower ratio of peak sidelobe (19%). This work provides a feasible solution for the design of SAW resonators to suppress spurious modes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Key Laboratory for Electronic Measurement Technology, Key Laboratory of Instrumentation Science and Dynamic Measurement, Ministry of Education, North University of China, Taiyuan 030051, China.
ORCID-Profile: Yulong Liu, Luhao Gou
Förderung
- Fundamental Research Program Shanxi Province
- Shanxi '1331 Project' Key Subject Construction
- Fundamental Research Program, Shanxi Province
- Shanxi ‘1331 Project’ Key Subject Construction
Zitieren
APA
Liu, Y., Wang, H., Zhang, F., Gou, L., Zhang, S., Cao, G., & Zhang, P. (2023). High-Performance SAW Resonator with Spurious Mode Suppression Using Hexagonal Weighted Electrode Structure. Sensors, 23(24), 9895. https://doi.org/10.3390/s23249895
Vancouver
Liu Y, Wang H, Zhang F, Gou L, Zhang S, Cao G, et al. High-Performance SAW Resonator with Spurious Mode Suppression Using Hexagonal Weighted Electrode Structure. Sensors. 2023;23(24):9895. doi:10.3390/s23249895
BibTeX
@article{Liu2023,
author = {Liu, Yulong and Wang, Hongliang and Zhang, Feng and Gou, Luhao and Zhang, Shengkuo and Cao, Gang and Zhang, Pengcheng},
title = {High-Performance SAW Resonator with Spurious Mode Suppression Using Hexagonal Weighted Electrode Structure},
journal = {Sensors},
year = {2023},
volume = {23},
number = {24},
pages = {9895},
doi = {10.3390/s23249895}
}
EUVIMED