EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Programmable Crypto-Processor for National Institute of Standards and Technology Post-Quantum Cryptography Standardization Based on the RISC-V Architecture

Jihye Lee, Whijin Kim, Ji-Hoon Kim

Sensors · 25.11.2023 · 23 (23) · 9408

DOI: 10.3390/s23239408 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 25.11.2023. Verfasst von Jihye Lee und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic and Electrical Engineering, Ewha Womans University, Seoul 04763, Republic of Korea. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and ICT, Korea government (MSIT), IC Design Education Center (IDEC), Republic of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The advancement of quantum computing threatens the security of conventional public-key cryptosystems. Post-quantum cryptography (PQC) was introduced to ensure data confidentiality in communication channels, and various algorithms are being developed. The National Institute of Standards and Technology (NIST) has initiated PQC standardization, and the selected algorithms for standardization and round 4 candidates were announced in 2022. Due to the large memory footprint and highly repetitive operations, there have been numerous attempts to accelerate PQC on both hardware and software. This paper introduces the RISC-V instruction set extension for NIST PQC standard algorithms and round 4 candidates. The proposed programmable crypto-processor can support a wide range of PQC algorithms with the extended RISC-V instruction set and demonstrates significant reductions in code size, the number of executed instructions, and execution cycle counts of target operations in PQC algorithms of up to 79%, 92%, and 87%, respectively, compared to RV64IM with optimization level 3 (-O3) in the GNU toolchain.

Schlagwörter

Stichwörter der Autor:innen

PQCRISC-Vcrypto-processordomain-specific processorpost-quantum cryptographyprogrammability

Autor:innen und Institutionen

  • Department of Electronic and Electrical Engineering, Ewha Womans University, Seoul 04763, Republic of Korea.

Förderung

  • Ministry of Science and ICT
  • Korea government (MSIT)
  • IC Design Education Center (IDEC), Republic of Korea

Zitieren

APA

Lee, J., Kim, W., & Kim, J. H. (2023). A Programmable Crypto-Processor for National Institute of Standards and Technology Post-Quantum Cryptography Standardization Based on the RISC-V Architecture. Sensors, 23(23), 9408. https://doi.org/10.3390/s23239408

Vancouver

Lee J, Kim W, Kim JH. A Programmable Crypto-Processor for National Institute of Standards and Technology Post-Quantum Cryptography Standardization Based on the RISC-V Architecture. Sensors. 2023;23(23):9408. doi:10.3390/s23239408

BibTeX
@article{Lee2023,
  author = {Lee, Jihye and Kim, Whijin and Kim, Ji-Hoon},
  title = {A Programmable Crypto-Processor for National Institute of Standards and Technology Post-Quantum Cryptography Standardization Based on the RISC-V Architecture},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {23},
  pages = {9408},
  doi = {10.3390/s23239408}
}
Kostenlos starten →