Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization
Sensors · 14.11.2023 · 23 (22) · 9185
DOI: 10.3390/s23229185 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 14.11.2023. Verfasst von Haifang He und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Laboratory of Bridge Safety and Technology (Beijing), Research Institute of Highway Ministry of Transport, Beijing 100088, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Project of National Engineering Laboratory of Bridge Safety and Technology, National Key Research and Development Program of China.
Abstract (Originalsprache)
Aging, corrosive environments, and inadequate maintenance may result in performance deterioration of civil infrastructures, and finite element model updating is a commonly employed structural health monitoring procedure in civil engineering to reflect the current situation and to ensure the safety and serviceability of structures. Using the finite element model updating process to obtain the relationship between the structural responses and updating parameters, this paper proposes a method of using the wavelet neural network (WNN) as the surrogate model combined with the wind-driven optimization (WDO) algorithm to update the structural finite element model. The method was applied to finite element model updating of a continuous beam structure of three equal spans to verify its feasibility, the results show that the WNN can reflect the nonlinear relationship between structural responses and the parameters and has an outstanding simulation performance; the WDO has an excellent ability for optimization and can effectively improve the efficiency of model updating. Finally, the method was applied to update a real bridge model, and the results show that the finite element model update based on WDO and WNN is applicable to the updating of a multi-parameter bridge model, which has practical significance in engineering and high efficiency in finite element model updating. The differences between the updated values and measured values are all within the range of 5%, while the maximum difference was reduced from −10.9% to −3.6%. The proposed finite element model updating method is applicable and practical for multi-parameter bridge model updating and has the advantages of high updating efficiency, reliability, and practical significance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Engineering Laboratory of Bridge Safety and Technology (Beijing), Research Institute of Highway Ministry of Transport, Beijing 100088, China.
- Anhui Provincial Highway Management Service Center, Hefei 230022, China.
- School of Civil Engineering, Beijing Jiaotong University, Beijing 100044, China.
- School of Civil Engineering, Sun Yat-sen University, Guangzhou 510275, China.
ORCID-Profile: Yulong Zhou, Jian Wang
Förderung
- Open Project of National Engineering Laboratory of Bridge Safety and Technology
- National Key Research and Development Program of China
Zitieren
APA
He, H., Zeng, B., Zhou, Y., Song, Y., Zhang, T., Su, H., & Wang, J. (2023). Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization. Sensors, 23(22), 9185. https://doi.org/10.3390/s23229185
Vancouver
He H, Zeng B, Zhou Y, Song Y, Zhang T, Su H, et al. Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization. Sensors. 2023;23(22):9185. doi:10.3390/s23229185
BibTeX
@article{He2023,
author = {He, Haifang and Zeng, Baojun and Zhou, Yulong and Song, Yuanyuan and Zhang, Tianneng and Su, Han and Wang, Jian},
title = {Bridge Model Updating Based on Wavelet Neural Network and Wind-Driven Optimization},
journal = {Sensors},
year = {2023},
volume = {23},
number = {22},
pages = {9185},
doi = {10.3390/s23229185}
}
EUVIMED