Detecting Helical Gearbox Defects from Raw Vibration Signal Using Convolutional Neural Networks
Sensors · 27.10.2023 · 23 (21) · 8769
DOI: 10.3390/s23218769 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 27.10.2023. Verfasst von Iulian Lupea und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Industrial Engineering, Robotics and Production Management, Technical University of Cluj-Napoca, 400641 Cluj-Napoca, Romania. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A study on the gearbox (speed reducer) defect detection models built from the raw vibration signal measured by a triaxial accelerometer and based on convolutional neural networks (CNNs) is presented. Gear faults such as localized pitting, localized wear on helical pinion tooth flanks, and lubricant low level are under observation for three rotating velocities of the actuator and three load levels at the reducer output. A deep learning approach, based on 1D-CNN or 2D-CNN, is employed to extract from the vibration image significant signal features that are used further to identify one of the four states (one normal and three defects) of the system, regardless of the selected load level or the speed. The best-performing 1D-CNN-based detection model, with a testing accuracy of 98.91%, was trained on the signals measured on the Y axis along the reducer input shaft direction. The vibration data acquired from the X and Z axes of the accelerometer proved to be less relevant in discriminating the states of the gearbox, the corresponding 1D-CNN-based models achieving 97.15% and 97% testing accuracy. The 2D-CNN-based model, built using the data from all three accelerometer axes, detects the state of the gearbox with an accuracy of 99.63%.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Industrial Engineering, Robotics and Production Management, Technical University of Cluj-Napoca, 400641 Cluj-Napoca, Romania.
- Faculty of Mathematics and Computer Science, Babes-Bolyai University, 400084 Cluj-Napoca, Romania.
Zitieren
APA
Lupea, I., & Lupea, M. (2023). Detecting Helical Gearbox Defects from Raw Vibration Signal Using Convolutional Neural Networks. Sensors, 23(21), 8769. https://doi.org/10.3390/s23218769
Vancouver
Lupea I, Lupea M. Detecting Helical Gearbox Defects from Raw Vibration Signal Using Convolutional Neural Networks. Sensors. 2023;23(21):8769. doi:10.3390/s23218769
BibTeX
@article{Lupea2023,
author = {Lupea, Iulian and Lupea, Mihaiela},
title = {Detecting Helical Gearbox Defects from Raw Vibration Signal Using Convolutional Neural Networks},
journal = {Sensors},
year = {2023},
volume = {23},
number = {21},
pages = {8769},
doi = {10.3390/s23218769}
}
EUVIMED