EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Customisable Data Acquisition System for Open-Source Hyperspectral Imaging

Yiwei Mao iD, Christopher H Betters iD, Samuel Garske iD, Jeremy Randle, K C Wong iD, Iver H Cairns iD, Bradley J Evans iD

Sensors · 21.10.2023 · 23 (20) · 8622

DOI: 10.3390/s23208622 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 21.10.2023. Verfasst von Yiwei Mao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Physics, The University of Sydney, Sydney, NSW 2006, Australia. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Government.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hyperspectral imagers, or imaging spectrometers, are used in many remote sensing environmental studies in fields such as agriculture, forestry, geology, and hydrology. In recent years, compact hyperspectral imagers were developed using commercial-off-the-shelf components, but there are not yet any off-the-shelf data acquisition systems on the market to deploy them. The lack of a self-contained data acquisition system with navigation sensors is a challenge that needs to be overcome to successfully deploy these sensors on remote platforms such as drones and aircraft. Our work is the first successful attempt to deploy an entirely open-source system that is able to collect hyperspectral and navigation data concurrently for direct georeferencing. In this paper, we describe a low-cost, lightweight, and deployable data acquisition device for the open-source hyperspectral imager (OpenHSI). We utilised commercial-off-the-shelf hardware and open-source software to create a compact data acquisition device that can be easily transported and deployed. The device includes a microcontroller and a custom-designed PCB board to interface with ancillary sensors and a Raspberry Pi 4B/NVIDIA Jetson. We demonstrated our data acquisition system on a Matrice M600 drone at a beach in Sydney, Australia, collecting timestamped hyperspectral, navigation, and orientation data in parallel. Using the navigation and orientation data, the hyperspectral data were georeferenced. While the entire system including the pushbroom hyperspectral imager and housing weighed 735 g, it was designed to be easy to assemble and modify. This low-cost, customisable, deployable data acquisition system provides a cost-effective solution for the remote sensing of hyperspectral data for everyone.

Schlagwörter

Stichwörter der Autor:innen

data acquisitionhyperspectral imagingopen-sourceremote sensing

Autor:innen und Institutionen

  • School of Physics, The University of Sydney, Sydney, NSW 2006, Australia.
  • ARC Training Centre for CubeSats UAVs and Their Applications, The University of Sydney, Sydney, NSW 2006, Australia.
  • Australian Centre for Field Robotics, The University of Sydney, Sydney, NSW 2006, Australia.
  • School of Environment and Rural Science, University of New England, Armidale, NSW 2351, Australia.

ORCID-Profile: Yiwei Mao, Christopher H Betters, Samuel Garske, K C Wong, Iver H Cairns, Bradley J Evans

Förderung

  • Australian Government

Zitieren

APA

Mao, Y., Betters, C. H., Garske, S., Randle, J., Wong, K. C., Cairns, I. H., & Evans, B. J. (2023). A Customisable Data Acquisition System for Open-Source Hyperspectral Imaging. Sensors, 23(20), 8622. https://doi.org/10.3390/s23208622

Vancouver

Mao Y, Betters CH, Garske S, Randle J, Wong KC, Cairns IH, et al. A Customisable Data Acquisition System for Open-Source Hyperspectral Imaging. Sensors. 2023;23(20):8622. doi:10.3390/s23208622

BibTeX
@article{Mao2023,
  author = {Mao, Yiwei and Betters, Christopher H and Garske, Samuel and Randle, Jeremy and Wong, K C and Cairns, Iver H and Evans, Bradley J},
  title = {A Customisable Data Acquisition System for Open-Source Hyperspectral Imaging},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {20},
  pages = {8622},
  doi = {10.3390/s23208622}
}
Kostenlos starten →