Time-Lapse GPR Measurements to Monitor Resin Injection in Fractures of Marble Blocks
Sensors · 16.10.2023 · 23 (20) · 8490
DOI: 10.3390/s23208490 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 16.10.2023. Verfasst von Luigi Zanzi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, 20133 Milan, Italy. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Politecnico di Milano.
Abstract (Originalsprache)
The objective of this study is to test the feasibility of time-lapse GPR measurements for the quality control of repairing operations (i.e., injections) on marble blocks. For the experimental activities, we used one of the preferred repairing fillers (epoxy resin) and some blocks from one of the world’s most famous marble production area (Carrara quarries in Italy). The selected blocks were paired in a laboratory by overlapping one over the other after inserting very thin spacers in order to simulate air-filled fractures. Fractures were investigated with a 3 GHz ground-penetrating radar (GPR) before and after the resin injections to measure the amplitude reduction expected when the resin substitutes the air. The results were compared with theoretical predictions based on the reflection coefficient predicted according to the thin bed theory. A field test was also performed on a naturally fractured marble block selected along the Carrara shore. Both laboratory and field tests validate the GPR as an effective tool for the quality control of resin injections, provided that measurements include proper calibration tests to control the amplitude instabilities and drift effects of the GPR equipment. The method is accurate enough to distinguish the unfilled fractures from the partially filled fractures and from the totally filled fractures. An automatic algorithm was developed and successfully tested for the rapid quantitative analysis of the time-lapse GPR profiles collected before and after the injections. The whole procedure is mature enough to be proposed to the marble industry to improve the effectiveness of repair interventions and to reduce the waste of natural stone reserves.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Dipartimento di Ingegneria Civile e Ambientale, Politecnico di Milano, 20133 Milan, Italy.
- Department of Mining Engineering, Shahid Bahonar University of Kerman, Kerman 76188, Iran.
- Department of Hydrology and Hydrodynamics, Institute of Geophysics Polish Academy of Sciences, Księcia Janusza 64, 01-452 Warszawa, Poland.
- Dipartimento di Scienze Chimiche e Geologiche, Università degli Studi di Modena e Reggio Emilia, 41125 Modena, Italy.
ORCID-Profile: Luigi Zanzi, Marjan Izadi-Yazdanabadi, Saeed Karimi-Nasab, Diego Arosio, Azadeh Hojat
Förderung
- Politecnico di Milano
Zitieren
APA
Zanzi, L., Izadi-Yazdanabadi, M., Karimi-Nasab, S., Arosio, D., & Hojat, A. (2023). Time-Lapse GPR Measurements to Monitor Resin Injection in Fractures of Marble Blocks. Sensors, 23(20), 8490. https://doi.org/10.3390/s23208490
Vancouver
Zanzi L, Izadi-Yazdanabadi M, Karimi-Nasab S, Arosio D, Hojat A. Time-Lapse GPR Measurements to Monitor Resin Injection in Fractures of Marble Blocks. Sensors. 2023;23(20):8490. doi:10.3390/s23208490
BibTeX
@article{Zanzi2023,
author = {Zanzi, Luigi and Izadi-Yazdanabadi, Marjan and Karimi-Nasab, Saeed and Arosio, Diego and Hojat, Azadeh},
title = {Time-Lapse GPR Measurements to Monitor Resin Injection in Fractures of Marble Blocks},
journal = {Sensors},
year = {2023},
volume = {23},
number = {20},
pages = {8490},
doi = {10.3390/s23208490}
}
EUVIMED