Computer Vision-Based Bridge Inspection and Monitoring: A Review
Sensors · 13.09.2023 · 23 (18) · 7863
DOI: 10.3390/s23187863 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 13.09.2023. Verfasst von Kui Luo und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering, Hunan University, Changsha 410082, China. Die Arbeit wurde bisher 166-mal zitiert (Crossref) und nennt 265 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science Foundation for Excellent Young Scholars of Hunan Province, Postgraduate Scientific Research Innovation Project of Hunan Province.
Abstract (Originalsprache)
Bridge inspection and monitoring are usually used to evaluate the status and integrity of bridge structures to ensure their safety and reliability. Computer vision (CV)-based methods have the advantages of being low cost, simple to operate, remote, and non-contact, and have been widely used in bridge inspection and monitoring in recent years. Therefore, this paper reviews three significant aspects of CV-based methods, including surface defect detection, vibration measurement, and vehicle parameter identification. Firstly, the general procedure for CV-based surface defect detection is introduced, and its application for the detection of cracks, concrete spalling, steel corrosion, and multi-defects is reviewed, followed by the robot platforms for surface defect detection. Secondly, the basic principle of CV-based vibration measurement is introduced, followed by the application of displacement measurement, modal identification, and damage identification. Finally, the CV-based vehicle parameter identification methods are introduced and their application for the identification of temporal and spatial parameters, weight parameters, and multi-parameters are summarized. This comprehensive literature review aims to provide guidance for selecting appropriate CV-based methods for bridge inspection and monitoring.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Civil Engineering, Hunan University, Changsha 410082, China.
- Key Laboratory for Damage Diagnosis of Engineering Structures of Hunan Province, College of Civil Engineering, Hunan University, Changsha 410082, China.
Förderung
- National Natural Science Foundation of China
- Science Foundation for Excellent Young Scholars of Hunan Province
- Postgraduate Scientific Research Innovation Project of Hunan Province
Zitieren
APA
Luo, K., Kong, X., Zhang, J., Hu, J., Li, J., & Tang, H. (2023). Computer Vision-Based Bridge Inspection and Monitoring: A Review. Sensors, 23(18), 7863. https://doi.org/10.3390/s23187863
Vancouver
Luo K, Kong X, Zhang J, Hu J, Li J, Tang H. Computer Vision-Based Bridge Inspection and Monitoring: A Review. Sensors. 2023;23(18):7863. doi:10.3390/s23187863
BibTeX
@article{Luo2023,
author = {Luo, Kui and Kong, Xuan and Zhang, Jie and Hu, Jiexuan and Li, Jinzhao and Tang, Hao},
title = {Computer Vision-Based Bridge Inspection and Monitoring: A Review},
journal = {Sensors},
year = {2023},
volume = {23},
number = {18},
pages = {7863},
doi = {10.3390/s23187863}
}
EUVIMED