EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dark Current Analysis on GeSn p-i-n Photodetectors

Soumava Ghosh iD, Greg Sun, Timothy A Morgan, Gregory T Forcherio iD, Hung-Hsiang Cheng, Guo-En Chang iD

Sensors · 30.08.2023 · 23 (17) · 7531

DOI: 10.3390/s23177531 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 30.08.2023. Verfasst von Soumava Ghosh und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, and Advanced Institute of Manufacturing with High-Tech Innovations (AIM-HI), National Chung Cheng University, C…. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council of Taiwan, Air Force Office of Scientific Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Group IV alloys of GeSn have been extensively investigated as a competing material alternative in shortwave-to-mid-infrared photodetectors (PDs). The relatively large defect densities present in GeSn alloys are the major challenge in developing practical devices, owing to the low-temperature growth and lattice mismatch with Si or Ge substrates. In this paper, we comprehensively analyze the impact of defects on the performance of GeSn p-i-n homojunction PDs. We first present our theoretical models to calculate various contributing components of the dark current, including minority carrier diffusion in p- and n-regions, carrier generation–recombination in the active intrinsic region, and the tunneling effect. We then analyze the effect of defect density in the GeSn active region on carrier mobilities, scattering times, and the dark current. A higher defect density increases the dark current, resulting in a reduction in the detectivity of GeSn p-i-n PDs. In addition, at low Sn concentrations, defect-related dark current density is dominant, while the generation dark current becomes dominant at a higher Sn content. These results point to the importance of minimizing defect densities in the GeSn material growth and device processing, particularly for higher Sn compositions necessary to expand the cutoff wavelength to mid- and long-wave infrared regime. Moreover, a comparative study indicates that further improvement of the material quality and optimization of device structure reduces the dark current and thereby increases the detectivity. This study provides more realistic expectations and guidelines for evaluating GeSn p-i-n PDs as a competitor to the III-V- and II-VI-based infrared PDs currently on the commercial market.

Schlagwörter

Stichwörter der Autor:innen

GeSn alloysdark currentdefectsdetectivitysustainability

Autor:innen und Institutionen

  • Department of Mechanical Engineering, and Advanced Institute of Manufacturing with High-Tech Innovations (AIM-HI), National Chung Cheng University, Chiayi 621301, Taiwan.
  • Department of Engineering, University of Massachusetts-Boston, Boston, MA 02125, USA.
  • Electro-Optic Technology Division, Naval Surface Warfare Center, Crane, IN 47522, USA.
  • Center for Condensed Matter Sciences and Graduate Institute of Electronics Engineering, National Taiwan University, Taipei 106, Taiwan.

ORCID-Profile: Soumava Ghosh, Gregory T Forcherio, Guo-En Chang

Förderung

  • National Science and Technology Council of Taiwan
  • Air Force Office of Scientific Research

Zitieren

APA

Ghosh, S., Sun, G., Morgan, T. A., Forcherio, G. T., Cheng, H. H., & Chang, G. E. (2023). Dark Current Analysis on GeSn p-i-n Photodetectors. Sensors, 23(17), 7531. https://doi.org/10.3390/s23177531

Vancouver

Ghosh S, Sun G, Morgan TA, Forcherio GT, Cheng HH, Chang GE. Dark Current Analysis on GeSn p-i-n Photodetectors. Sensors. 2023;23(17):7531. doi:10.3390/s23177531

BibTeX
@article{Ghosh2023,
  author = {Ghosh, Soumava and Sun, Greg and Morgan, Timothy A and Forcherio, Gregory T and Cheng, Hung-Hsiang and Chang, Guo-En},
  title = {Dark Current Analysis on GeSn p-i-n Photodetectors},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {17},
  pages = {7531},
  doi = {10.3390/s23177531}
}
Kostenlos starten →