EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation on High-Performance Cu-Based Surface Plasmon Resonance Sensor for Biosensing Application

M Muthumanikkam, Alagu Vibisha, Michael Cecil Lordwin Prabhakar, Ponnan Suresh iD, Karupiya Balasundaram Rajesh, Zbigniew Jaroszewicz iD, Rajan Jha

Sensors · 29.08.2023 · 23 (17) · 7495

DOI: 10.3390/s23177495 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 29.08.2023. Verfasst von M Muthumanikkam und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of ECE, Vel Tech Rangarajan Dr Sagunthala R & D Institute of Science and Technology, Chennai 600025, Tamil Nadu, India. Hauptthemen laut MEDLINE: Surface Plasmon Resonance, Copper. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This numerical research presents a simple hybrid structure comprised of TiO2-Cu-BaTiO3 for a modified Kretschmann configuration that exhibits high sensitivity and high resolution for biosensing applications through an angular interrogation method. Recently, copper (Cu) emerged as an exceptional choice as a plasmonic metal for developing surface plasmon sensors (SPR) with high resolution as it yields finer, thinner SPR curves than Ag and Au. As copper is prone to oxidation, especially in ambient conditions, the proposed structure involves the utilization of barium titanate (BaTiO3) film as a protection layer that not only preserves Cu film from oxidizing but enhances the performance of the sensor to a great extent. Numerical results also show that the utilization of a thin adhesive layer of titanium dioxide (TiO2) between the prism base and Cu film not only induces strong interaction between them but also enhances the performance of the sensor. Such a configuration, upon suitable optimization of the thickness of each layer, is found to enhance sensitivity as high as 552°/RIU with a figure of merit (FOM) of 136.97 RIU−1. This suggested biosensor design with enhanced sensitivity is expected to enable long-term detection with greater accuracy and sensitivity even when using Cu as a plasmonic metal.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Surface Plasmon ResonanceCopperMotion PicturesTitaniumBarium Compounds

Stichwörter der Autor:innen

barium titanatebiosensorcoppersensitivitysurface plasmon resonancetitanium oxide

Substanzen

Copperbarium titanate(IV)TitaniumBarium Compoundstitanium dioxide

Autor:innen und Institutionen

  • Department of ECE, Vel Tech Rangarajan Dr Sagunthala R & D Institute of Science and Technology, Chennai 600025, Tamil Nadu, India.
  • Department of Physics, Chikkanna Government Arts College, Tiruppur 641602, Tamil Nadu, India.
  • National Institute of Telecommunications, ul. Szachowa 1, 04-894 Warsaw, Poland.
  • Nanophotonics and Plasmonic Laboratory, School of Basic Sciences, Indian Institute of Technology, Bhubaneswar 752050, Odisha, India.

ORCID-Profile: Ponnan Suresh, Zbigniew Jaroszewicz

Zitieren

APA

Muthumanikkam, M., Vibisha, A., Lordwin Prabhakar, M. C., Suresh, P., Rajesh, K. B., Jaroszewicz, Z., & Jha, R. (2023). Numerical Investigation on High-Performance Cu-Based Surface Plasmon Resonance Sensor for Biosensing Application. Sensors, 23(17), 7495. https://doi.org/10.3390/s23177495

Vancouver

Muthumanikkam M, Vibisha A, Lordwin Prabhakar MC, Suresh P, Rajesh KB, Jaroszewicz Z, et al. Numerical Investigation on High-Performance Cu-Based Surface Plasmon Resonance Sensor for Biosensing Application. Sensors. 2023;23(17):7495. doi:10.3390/s23177495

BibTeX
@article{Muthumanikkam2023,
  author = {Muthumanikkam, M and Vibisha, Alagu and Lordwin Prabhakar, Michael Cecil and Suresh, Ponnan and Rajesh, Karupiya Balasundaram and Jaroszewicz, Zbigniew and Jha, Rajan},
  title = {Numerical Investigation on High-Performance Cu-Based Surface Plasmon Resonance Sensor for Biosensing Application},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {17},
  pages = {7495},
  doi = {10.3390/s23177495}
}
Kostenlos starten →