EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wheelchair Rugby Sprint Force-Velocity Modeling Using Inertial Measurement Units and Sport Specific Parameters: A Proof of Concept

Marc Klimstra iD, Daniel Geneau iD, Melissa Lacroix iD, Matt Jensen, Joel Greenshields iD, Patrick Cormier iD, Ryan Brodie, Drew Commandeur, Ming-Chang Tsai iD

Sensors · 2023

DOI: 10.3390/s23177489 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Marc Klimstra und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Exercise Science, Physical and Health Education, University of Victoria, Victoria, BC V8P 5C2, Canada. Hauptthemen laut MEDLINE: Sports, Wheelchairs. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Para-sports such as wheelchair rugby have seen increased use of inertial measurement units (IMU) to measure wheelchair mobility. The accessibility and accuracy of IMUs have enabled the quantification of many wheelchair metrics and the ability to further advance analyses such as force-velocity (FV) profiling. However, the FV modeling approach has not been refined to include wheelchair specific parameters.

Purpose

The purpose of this study was to compare wheelchair rugby sprint FV profiles, developed from a wheel-mounted IMU, using current mono-exponential modeling techniques against a dynamic resistive force model with wheelchair specific resistance coefficients.

Methods

Eighteen athletes from a national wheelchair rugby program performed 2 × 45 m all-out sprints on an indoor hardwood court surface.

Results

Velocity modelling displayed high agreeability, with an average RMSE of 0.235 ± 0.07 m/s−1 and r2 of 0.946 ± 0.02. Further, the wheelchair specific resistive force model resulted in greater force and power outcomes, better aligning with previously collected measures.

Conclusions

The present study highlights the proof of concept that a wheel-mounted IMU combined with wheelchair-specific FV modelling provided estimates of force and power that better account for the resistive forces encountered by wheelchair rugby athletes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SportsWheelchairsHumansRugbyAthletesBenchmarking

Stichwörter der Autor:innen

IMUsportwheelchair

Autor:innen und Institutionen

  • School of Exercise Science, Physical and Health Education, University of Victoria, Victoria, BC V8P 5C2, Canada.
  • Canadian Sport Institute Pacific, Victoria, BC V9E 2C5, Canada.
  • Canadian Sport Institute Ontario, Toronto, ON M1C 0C7, Canada.
  • Wheelchair Rugby Canada, Ottawa, ON K1G 4K3, Canada.

ORCID-Profile: Marc Klimstra, Daniel Geneau, Melissa Lacroix, Joel Greenshields, Patrick Cormier, Ming-Chang Tsai

Zitieren

APA

Klimstra, M., Geneau, D., Lacroix, M., Jensen, M., Greenshields, J., Cormier, P., Brodie, R., Commandeur, D., & Tsai, M. C. (2023). Wheelchair Rugby Sprint Force-Velocity Modeling Using Inertial Measurement Units and Sport Specific Parameters: A Proof of Concept. Sensors. https://doi.org/10.3390/s23177489

Vancouver

Klimstra M, Geneau D, Lacroix M, Jensen M, Greenshields J, Cormier P, et al. Wheelchair Rugby Sprint Force-Velocity Modeling Using Inertial Measurement Units and Sport Specific Parameters: A Proof of Concept. Sensors. 2023. doi:10.3390/s23177489

BibTeX
@article{Klimstra2023,
  author = {Klimstra, Marc and Geneau, Daniel and Lacroix, Melissa and Jensen, Matt and Greenshields, Joel and Cormier, Patrick and Brodie, Ryan and Commandeur, Drew and Tsai, Ming-Chang},
  title = {Wheelchair Rugby Sprint Force-Velocity Modeling Using Inertial Measurement Units and Sport Specific Parameters: A Proof of Concept},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23177489}
}
Kostenlos starten →