EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Damage Monitoring of Braided Composites Using CNT Yarn Sensor Based on Artificial Fish Swarm Algorithm

Hongxia Wang, Yungang Jia, Minrui Jia iD, Xiaoyuan Pei, Zhenkai Wan

Sensors · 10.08.2023 · 23 (16) · 7067

DOI: 10.3390/s23167067 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.08.2023. Verfasst von Hongxia Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Engineering Teaching Practice Training Center, Tiangong University, Tianjin 300387, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China (NSFC), National Natural Science Foundation of China (NSFC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to enable intelligent structural health monitoring of internal damage in aerospace structural components, providing a crucial means of assuring safety and reliability in the aerospace field. To address the limitations and assumptions of traditional monitoring methods, carbon nanotube (CNT) yarn sensors are used as key elements. These sensors are woven with carbon fiber yarns using a three-dimensional six-way braiding process and cured with resin composites. To optimize the sensor configuration, an artificial fish swarm algorithm (AFSA) is introduced, simulating the foraging behavior of fish to determine the best position and number of CNT yarn sensors. Experimental simulations are conducted on 3D braided composites of varying sizes, including penetration hole damage, line damage, and folded wire-mounted damage, to analyze the changes in the resistance data of carbon nanosensors within the damaged material. The results demonstrate that the optimized configuration of CNT yarn sensors based on AFSA is suitable for damage monitoring in 3D woven composites. The experimental positioning errors range from 0.224 to 0.510 mm, with all error values being less than 1 mm, thus achieving minimum sensor coverage for a maximum area. This result not only effectively reduces the cost of the monitoring system, but also improves the accuracy and reliability of the monitoring process.

Schlagwörter

Stichwörter der Autor:innen

artificial fish swarm algorithm (AFSA)braided compositescarbon nanotube yarn (CNT yarn)damage location sourceoptimized configuration of sensors

Autor:innen und Institutionen

  • Engineering Teaching Practice Training Center, Tiangong University, Tianjin 300387, China.
  • National Experimental Teaching Demonstration Center for Engineering Training, Tianjin 300387, China.
  • Tianjin Branch of National Computer Network Emergency Response Technical Team/Coordination Center of China, Tianjin 300100, China.
  • School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.

ORCID-Profile: Minrui Jia

Förderung

  • the National Natural Science Foundation of China (NSFC)
  • National Natural Science Foundation of China (NSFC)

Zitieren

APA

Wang, H., Jia, Y., Jia, M., Pei, X., & Wan, Z. (2023). Damage Monitoring of Braided Composites Using CNT Yarn Sensor Based on Artificial Fish Swarm Algorithm. Sensors, 23(16), 7067. https://doi.org/10.3390/s23167067

Vancouver

Wang H, Jia Y, Jia M, Pei X, Wan Z. Damage Monitoring of Braided Composites Using CNT Yarn Sensor Based on Artificial Fish Swarm Algorithm. Sensors. 2023;23(16):7067. doi:10.3390/s23167067

BibTeX
@article{Wang2023,
  author = {Wang, Hongxia and Jia, Yungang and Jia, Minrui and Pei, Xiaoyuan and Wan, Zhenkai},
  title = {Damage Monitoring of Braided Composites Using CNT Yarn Sensor Based on Artificial Fish Swarm Algorithm},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {16},
  pages = {7067},
  doi = {10.3390/s23167067}
}
Kostenlos starten →