EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determining Magnitudes of Forces at Known Locations through a Strain Gauge Force Transducer

Edward Bednarz iD, Christian Dietrich, Brad Hepner, Jay Patel, Abas Sabouni iD

Sensors · 08.08.2023 · 23 (16) · 7017

DOI: 10.3390/s23167017 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 08.08.2023. Verfasst von Edward Bednarz und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Electrical Engineering, Wilkes University, Wilkes-Barre, PA 18766, USA. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A novel strain gauge force transducer was developed to minimize the number of strain gauges needed to determine the magnitudes of loads when the locations are known. This innovative methodology requires only one strain gauge for each force magnitude desired, reducing the complexity and cost associated with traditional approaches. The theory was verified with laboratory experiments. Seven uniaxial strain gauges were attached to the underside of a simply supported, slender, aluminum beam. One or more loads were applied either directly atop strain gauges or in known positions between strain gauges. Experiments were conducted on several different single and double-load configurations to evaluate the extent of the new methodology which yielded average errors under 5% for the cases where loads were direct atop strain gauges and 6.6% for the cases where the loads were between strain gauges. These findings indicate the potential of this novel strain gauge force transducer to revolutionize load measurement in scenarios where load locations are predetermined.

Schlagwörter

Stichwörter der Autor:innen

force transducerload identificationstrain gaugestructural analysis

Autor:innen und Institutionen

  • Department of Mechanical and Electrical Engineering, Wilkes University, Wilkes-Barre, PA 18766, USA.

ORCID-Profile: Edward Bednarz, Abas Sabouni

Zitieren

APA

Bednarz, E., Dietrich, C., Hepner, B., Patel, J., & Sabouni, A. (2023). Determining Magnitudes of Forces at Known Locations through a Strain Gauge Force Transducer. Sensors, 23(16), 7017. https://doi.org/10.3390/s23167017

Vancouver

Bednarz E, Dietrich C, Hepner B, Patel J, Sabouni A. Determining Magnitudes of Forces at Known Locations through a Strain Gauge Force Transducer. Sensors. 2023;23(16):7017. doi:10.3390/s23167017

BibTeX
@article{Bednarz2023,
  author = {Bednarz, Edward and Dietrich, Christian and Hepner, Brad and Patel, Jay and Sabouni, Abas},
  title = {Determining Magnitudes of Forces at Known Locations through a Strain Gauge Force Transducer},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {16},
  pages = {7017},
  doi = {10.3390/s23167017}
}
Kostenlos starten →