EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Battery Testing and Discharge Model Validation for Electric Unmanned Aerial Vehicles (UAV)

Attilio Di Nisio iD, Giulio Avanzini iD, Daniel Lotano iD, Donato Stigliano, Anna M L Lanzolla

Sensors · 04.08.2023 · 23 (15) · 6937

DOI: 10.3390/s23156937 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 04.08.2023. Verfasst von Attilio Di Nisio und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Information Engineering, Polytechnic University of Bari, Via E. Orabona 4, 70125 Bari, Italy. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrical engines are becoming more common than thermal ones. Therefore, there is an increasing interest in the characterization of batteries and in measuring their state of charge, as an overestimation would cause the vehicle to run out of energy and an underestimation means that the vehicle is running in suboptimal conditions. This is of paramount importance for flying vehicles, as their endurance decreases with the increase in weight. This work aims at finding a novel empirical model for the discharge curve of an arbitrary number of battery pack cells, that uses as few tunable parameters as possible and hence is easy to adapt for every single battery pack needed by the operator. A suitable measurement setup for battery tests, which includes voltage and current sensors, has been developed and described. Tests are performed on both constant and variable power loads to investigate different real-world scenarios that are easy to reproduce. The main achievement of this novel model is indeed the ability to predict discharges at variable power based on a preliminary characterization performed at constant power. This leads to the possibility of rapidly tuning the model for each battery with promising accuracy. The results will show that the predicted discharged capacities of the model have a normalized error below 0.7%.

Schlagwörter

Stichwörter der Autor:innen

UAVbatterycapacitydischarge modellithium polymer batterypower

Autor:innen und Institutionen

  • Department of Electrical and Information Engineering, Polytechnic University of Bari, Via E. Orabona 4, 70125 Bari, Italy.
  • Department of Engineering for Innovation, Università del Salento, Via per Monteroni, 73100 Lecce, Italy.

ORCID-Profile: Attilio Di Nisio, Giulio Avanzini, Daniel Lotano

Zitieren

APA

Di Nisio, A., Avanzini, G., Lotano, D., Stigliano, D., & Lanzolla, A. M. L. (2023). Battery Testing and Discharge Model Validation for Electric Unmanned Aerial Vehicles (UAV). Sensors, 23(15), 6937. https://doi.org/10.3390/s23156937

Vancouver

Di Nisio A, Avanzini G, Lotano D, Stigliano D, Lanzolla AML. Battery Testing and Discharge Model Validation for Electric Unmanned Aerial Vehicles (UAV). Sensors. 2023;23(15):6937. doi:10.3390/s23156937

BibTeX
@article{DiNisio2023,
  author = {Di Nisio, Attilio and Avanzini, Giulio and Lotano, Daniel and Stigliano, Donato and Lanzolla, Anna M L},
  title = {Battery Testing and Discharge Model Validation for Electric Unmanned Aerial Vehicles (UAV)},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {15},
  pages = {6937},
  doi = {10.3390/s23156937}
}
Kostenlos starten →