Approach for Non-Intrusive Detection of the Fit of Orthopaedic Devices Based on Vibrational Data
Sensors · 2023
DOI: 10.3390/s23146500 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Constanze Neupetsch und 7 weiteren Autor:innen. Beteiligte Einrichtung: Fraunhofer Institute for Machine Tools and Forming Technology, 09126 Chemnitz, Germany. Hauptthemen laut MEDLINE: Orthopedics, Artificial Limbs, Amputees. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Saxon State Ministry for Science and the Arts, Chemnitz University of Technology, State Ministry of Science, Culture and Tourism (SMWK).
Abstract (Originalsprache)
The soft tissues of residual limb amputees are subject to large volume fluctuations over the course of a day. Volume fluctuations in residual limbs can lead to local pressure marks, causing discomfort, pain and rejection of prostheses. Existing methods for measuring interface stress encounter several limitations. A major problem is that the measurement instrumentation is applied in the sensitive interface between the prosthesis and residual limb. This paper presents the principle investigation of a non-intrusive technique to evaluate the fit of orthopaedic prosthesis sockets in transfemoral amputees based on experimentally obtained vibrational data. The proposed approach is based on changes in the dynamical behaviour detectable at the outer surface of prostheses; thus, the described interface is not affected. Based on the experimental investigations shown and the derived results, it can be concluded that structural dynamic measurements are a promising non-intrusive technique to evaluate the fit of orthopaedic prosthesis sockets in transfemoral amputee patients. The obtained resonance frequency changes of 2% are a good indicator of successful applicabilityas these changes can be detected without the need for complex measurement devices.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Fraunhofer Institute for Machine Tools and Forming Technology, 09126 Chemnitz, Germany.
- Professorship Adaptronics and Lightweight Design, Faculty of Mechanical Engineering, Chemnitz University of Technology, 09111 Chemnitz, Germany.
- Department of Orthopaedic, Trauma and Plastic Surgery, University of Leipzig Medical Center, 04103 Leipzig, Germany.
- Institute of Biomedical Engineering, Dresden University of Technology, 01307 Dresden, Germany.
ORCID-Profile: Constanze Neupetsch, Christoph-Eckhard Heyde, Welf-Guntram Drossel
Förderung
- Saxon State Ministry for Science and the Arts
- Chemnitz University of Technology
- State Ministry of Science, Culture and Tourism (SMWK)
Zitieren
APA
Neupetsch, C., Hensel, E., Heinke, A., Stapf, T., Stecher, N., Malberg, H., Heyde, C. E., & Drossel, W. G. (2023). Approach for Non-Intrusive Detection of the Fit of Orthopaedic Devices Based on Vibrational Data. Sensors. https://doi.org/10.3390/s23146500
Vancouver
Neupetsch C, Hensel E, Heinke A, Stapf T, Stecher N, Malberg H, et al. Approach for Non-Intrusive Detection of the Fit of Orthopaedic Devices Based on Vibrational Data. Sensors. 2023. doi:10.3390/s23146500
BibTeX
@article{Neupetsch2023,
author = {Neupetsch, Constanze and Hensel, Eric and Heinke, Andreas and Stapf, Tom and Stecher, Nico and Malberg, Hagen and Heyde, Christoph-Eckhard and Drossel, Welf-Guntram},
title = {Approach for Non-Intrusive Detection of the Fit of Orthopaedic Devices Based on Vibrational Data},
journal = {Sensors},
year = {2023},
doi = {10.3390/s23146500}
}
EUVIMED