EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Embedded Fiber Bragg Grating Sensors for Monitoring Temperature and Thermo-Elastic Deformations in a Carbon Fiber Optical Bench

Ana Fernández-Medina iD, Malte Frövel iD, Raquel López Heredero iD, Tomás Belenguer, Antonia de la Torre, Carolina Moravec, Ricardo San Julián, Alejandro Gonzalo, María Cebollero, Alberto Álvarez-Herrero iD

Sensors · 18.07.2023 · 23 (14) · 6499

DOI: 10.3390/s23146499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.07.2023. Verfasst von Ana Fernández-Medina und 9 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for Aerospace Technology (INTA), Carretera de Ajalvir km 4, 28850 Torrejón de Ardoz, Spain. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación. Ministerio de ciencia e investigación. Spain, AEI/MCIN/10.13039/501100011033/, ERDF.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A composite optical bench made up of Carbon Fiber Reinforced Polymer (CFRP) skin and aluminum honeycomb has been developed for the Tunable Magnetograph instrument (TuMag) for the SUNRISE III mission within the NASA Long Duration Balloon Program. This optical bench has been designed to meet lightweight and low sensitivity to thermal gradient requirements, resulting in a low Coefficient of Thermal Expansion (CTE). In addition to the flight model, a breadboard model identical to the flight one has been manufactured, including embedded fiber Bragg temperature and strain sensors. The aim of this is to explore if the use of distributed fiber Bragg gratings (FBGs) can provide valuable information for strain and temperature mapping of an optical instrument on board a space mission during its operation as well as its on-ground testing. Furthermore, surface-mounted strain FBG sensors and thermocouples have been installed in the optical bench for intercomparison purposes. This paper presents the results obtained from a thermal vacuum test consisting of three thermal cycles with stabilization steps at 100 °C, 60 °C, 20 °C and −20 °C. Experimental results provide information about how FBG embedded temperature sensors can provide a proper and quick response to the temperature changes of the optical bench and that embedded FBG strain sensors are able to measure micro-deformation induced in a close-to-zero CTE optical bench.

Schlagwörter

Stichwörter der Autor:innen

Carbon Fiber Reinforce Polymerfiber bragg gratingsmultiplexingoptical benchstrain measurementtemperature compensationtemperature measurement

Autor:innen und Institutionen

  • National Institute for Aerospace Technology (INTA), Carretera de Ajalvir km 4, 28850 Torrejón de Ardoz, Spain.

ORCID-Profile: Ana Fernández-Medina, Malte Frövel, Raquel López Heredero, Alberto Álvarez-Herrero

Förderung

  • Agencia Estatal de Investigación. Ministerio de ciencia e investigación. Spain
  • AEI/MCIN/10.13039/501100011033/
  • ERDF

Zitieren

APA

Fernández-Medina, A., Frövel, M., López Heredero, R., Belenguer, T., de la Torre, A., Moravec, C., San Julián, R., Gonzalo, A., Cebollero, M., & Álvarez-Herrero, A. (2023). Embedded Fiber Bragg Grating Sensors for Monitoring Temperature and Thermo-Elastic Deformations in a Carbon Fiber Optical Bench. Sensors, 23(14), 6499. https://doi.org/10.3390/s23146499

Vancouver

Fernández-Medina A, Frövel M, López Heredero R, Belenguer T, de la Torre A, Moravec C, et al. Embedded Fiber Bragg Grating Sensors for Monitoring Temperature and Thermo-Elastic Deformations in a Carbon Fiber Optical Bench. Sensors. 2023;23(14):6499. doi:10.3390/s23146499

BibTeX
@article{FernndezMedina2023,
  author = {Fernández-Medina, Ana and Frövel, Malte and López Heredero, Raquel and Belenguer, Tomás and de la Torre, Antonia and Moravec, Carolina and San Julián, Ricardo and Gonzalo, Alejandro and Cebollero, María and Álvarez-Herrero, Alberto},
  title = {Embedded Fiber Bragg Grating Sensors for Monitoring Temperature and Thermo-Elastic Deformations in a Carbon Fiber Optical Bench},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {14},
  pages = {6499},
  doi = {10.3390/s23146499}
}
Kostenlos starten →