EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Diesel Engine Fault Status Identification Method Based on Synchro Squeezing S-Transform and Vision Transformer

Siyu Li, Zichang Liu iD, Yunbin Yan, Rongcai Wang, Enzhi Dong, Zhonghua Cheng iD

Sensors · 16.07.2023 · 23 (14) · 6447

DOI: 10.3390/s23146447 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 16.07.2023. Verfasst von Siyu Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: Shijiazhuang Campus of Army Engineering University of PLA, Shijiazhuang 050003, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Defense Research Fund Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The reliability and safety of diesel engines gradually decrease with the increase in running time, leading to frequent failures. To address the problem that it is difficult for the traditional fault status identification methods to identify diesel engine faults accurately, a diesel engine fault status identification method based on synchro squeezing S-transform (SSST) and vision transformer (ViT) is proposed. This method can effectively combine the advantages of the SSST method in processing non-linear and non-smooth signals with the powerful image classification capability of ViT. The vibration signals reflecting the diesel engine status are collected by sensors. To solve the problems of low time-frequency resolution and weak energy aggregation in traditional signal time-frequency analysis methods, the SSST method is used to convert the vibration signals into two-dimensional time-frequency maps; the ViT model is used to extract time-frequency image features for training to achieve diesel engine status assessment. Pre-set fault experiments are carried out using the diesel engine condition monitoring experimental bench, and the proposed method is compared with three traditional methods, namely, ST-ViT, SSST-2DCNN and FFT spectrum-1DCNN. The experimental results show that the overall fault status identification accuracy in the public dataset and the actual laboratory data reaches 98.31% and 95.67%, respectively, providing a new idea for diesel engine fault status identification.

Schlagwörter

Stichwörter der Autor:innen

diesel enginefault status identificationreliabilitysynchro squeezing S-transformtime-frequency analysisvision transformer

Autor:innen und Institutionen

  • Shijiazhuang Campus of Army Engineering University of PLA, Shijiazhuang 050003, China.

ORCID-Profile: Zichang Liu, Zhonghua Cheng

Förderung

  • National Natural Science Foundation of China
  • National Defense Research Fund Project

Zitieren

APA

Li, S., Liu, Z., Yan, Y., Wang, R., Dong, E., & Cheng, Z. (2023). Research on Diesel Engine Fault Status Identification Method Based on Synchro Squeezing S-Transform and Vision Transformer. Sensors, 23(14), 6447. https://doi.org/10.3390/s23146447

Vancouver

Li S, Liu Z, Yan Y, Wang R, Dong E, Cheng Z. Research on Diesel Engine Fault Status Identification Method Based on Synchro Squeezing S-Transform and Vision Transformer. Sensors. 2023;23(14):6447. doi:10.3390/s23146447

BibTeX
@article{Li2023,
  author = {Li, Siyu and Liu, Zichang and Yan, Yunbin and Wang, Rongcai and Dong, Enzhi and Cheng, Zhonghua},
  title = {Research on Diesel Engine Fault Status Identification Method Based on Synchro Squeezing S-Transform and Vision Transformer},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {14},
  pages = {6447},
  doi = {10.3390/s23146447}
}
Kostenlos starten →