EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effectiveness of a UAV-Based LiDAR Survey to Develop Digital Terrain Models and Topographic Texture Analyses

Piotr Bartmiński iD, Marcin Siłuch, Waldemar Kociuba iD

Sensors · 14.07.2023 · 23 (14) · 6415

DOI: 10.3390/s23146415 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 14.07.2023. Verfasst von Piotr Bartmiński und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Earth and Environmental Sciences, Maria Curie-Skłodowska University in Lublin, 20-031 Lublin, Poland. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a comparison of data acquired from three LiDAR sensors from different manufacturers, i.e., Yellow Scan Mapper (YSM), AlphaAir 450 Airborne LiDAR System CHC Navigation (CHC) and DJI Zenmuse L1 (L1). The same area was surveyed with laser sensors mounted on the DIJ Matrice 300 RTK UAV platform. In order to compare the data, a diverse test area located in the north-western part of the Lublin Province in eastern Poland was selected. The test area was a gully system with high vegetation cover. In order to compare the UAV information, LiDAR reference data were used, which were collected within the ISOK project (acquired for the whole area of Poland). In order to examine the differentiation of the acquired data, both classified point clouds and DTM products calculated on the basis of point clouds acquired from individual sensors were compared. The analyses showed that the largest average height differences between terrain models calculated from point clouds were recorded between the CHC sensor and the base data, exceeding 2.5 m. The smallest differences were recorded between the L1 sensor and ISOK data—RMSE was 0.31 m. The use of UAVs to acquire very high resolution data can only be used locally and must be subject to very stringent landing site preparation procedures, as well as data processing in DTM and its derivatives.

Schlagwörter

Stichwörter der Autor:innen

DTM output from LiDAR-UAV dataLiDAR-UAV surveylaser sensors efficiency comparison

Autor:innen und Institutionen

  • Institute of Earth and Environmental Sciences, Maria Curie-Skłodowska University in Lublin, 20-031 Lublin, Poland.

ORCID-Profile: Piotr Bartmiński, Waldemar Kociuba

Zitieren

APA

Bartmiński, P., Siłuch, M., & Kociuba, W. (2023). The Effectiveness of a UAV-Based LiDAR Survey to Develop Digital Terrain Models and Topographic Texture Analyses. Sensors, 23(14), 6415. https://doi.org/10.3390/s23146415

Vancouver

Bartmiński P, Siłuch M, Kociuba W. The Effectiveness of a UAV-Based LiDAR Survey to Develop Digital Terrain Models and Topographic Texture Analyses. Sensors. 2023;23(14):6415. doi:10.3390/s23146415

BibTeX
@article{Bartmiski2023,
  author = {Bartmiński, Piotr and Siłuch, Marcin and Kociuba, Waldemar},
  title = {The Effectiveness of a UAV-Based LiDAR Survey to Develop Digital Terrain Models and Topographic Texture Analyses},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {14},
  pages = {6415},
  doi = {10.3390/s23146415}
}
Kostenlos starten →