EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compact Wideband Groove Gap Waveguide Bandpass Filters Manufactured with 3D Printing and CNC Milling Techniques

Clara Máximo-Gutierrez, Juan Hinojosa iD, José Abad-López, Antonio Urbina-Yeregui iD, Alejandro Alvarez-Melcon iD

Sensors · 2023

DOI: 10.3390/s23136234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Clara Máximo-Gutierrez und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Information and Communications Technology, Universidad Politécnica de Cartagena, Plaza del Hospital no. 1, 30202 Cartagena, Spain. Hauptthemen laut MEDLINE: Satellite Communications, Printing, Three-Dimensional. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, Fundación Séneca Región de Murcia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents for the first time a compact wideband bandpass filter in groove gap waveguide (GGW) technology. The structure is obtained by including metallic pins along the central part of the GGW bottom plate according to an n-order Chebyshev stepped impedance synthesis method. The bandpass response is achieved by combining the high-pass characteristic of the GGW and the low-pass behavior of the metallic pins, which act as impedance inverters. This simple structure together with the rigorous design technique allows for a reduction in the manufacturing complexity for the realization of high-performance filters. These capabilities are verified by designing a fifth-order GGW Chebyshev bandpass filter with a bandwidth BW = 3.7 GHz and return loss RL = 20 dB in the frequency range of the WR-75 standard, and by implementing it using computer numerical control (CNC) machining and three-dimensional (3D) printing techniques. Three prototypes have been manufactured: one using a computer numerical control (CNC) milling machine and two others by means of a stereolithography-based 3D printer and a photopolymer resin. One of the two resin-based prototypes has been metallized from a silver vacuum thermal evaporation deposition technique, while for the other a spray coating system has been used. The three prototypes have shown a good agreement between the measured and simulated S-parameters, with insertion losses better than IL = 1.2 dB. Reduced size and high-performance frequency responses with respect to other GGW bandpass filters were obtained. These wideband GGW filter prototypes could have a great potential for future emerging satellite communications systems.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Satellite CommunicationsPrinting, Three-DimensionalComputer SimulationEquipment DesignElectric Impedance

Stichwörter der Autor:innen

3D printingCNC machiningbandpass filtergroove gap waveguide technologylowpass filterstepped impedance synthesis

Autor:innen und Institutionen

  • Department of Information and Communications Technology, Universidad Politécnica de Cartagena, Plaza del Hospital no. 1, 30202 Cartagena, Spain.
  • Department of Electronics and Computer Engineering, Universidad Politécnica de Cartagena, Plaza del Hospital no. 1, 30202 Cartagena, Spain.
  • Department of Applied Physics, Universidad Politécnica de Cartagena, Calle Doctor Fleming s/n, 30202 Cartagena, Spain.

ORCID-Profile: Juan Hinojosa, Antonio Urbina-Yeregui, Alejandro Alvarez-Melcon

Förderung

  • Agencia Estatal de Investigación
  • Fundación Séneca Región de Murcia

Zitieren

APA

Máximo-Gutierrez, C., Hinojosa, J., Abad-López, J., Urbina-Yeregui, A., & Alvarez-Melcon, A. (2023). Compact Wideband Groove Gap Waveguide Bandpass Filters Manufactured with 3D Printing and CNC Milling Techniques. Sensors. https://doi.org/10.3390/s23136234

Vancouver

Máximo-Gutierrez C, Hinojosa J, Abad-López J, Urbina-Yeregui A, Alvarez-Melcon A. Compact Wideband Groove Gap Waveguide Bandpass Filters Manufactured with 3D Printing and CNC Milling Techniques. Sensors. 2023. doi:10.3390/s23136234

BibTeX
@article{MximoGutierrez2023,
  author = {Máximo-Gutierrez, Clara and Hinojosa, Juan and Abad-López, José and Urbina-Yeregui, Antonio and Alvarez-Melcon, Alejandro},
  title = {Compact Wideband Groove Gap Waveguide Bandpass Filters Manufactured with 3D Printing and CNC Milling Techniques},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23136234}
}
Kostenlos starten →