EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Validation of Estimators for Weight-Bearing and Shoulder Joint Loads Using Instrumented Crutches

Marco Ghidelli iD, Cristina Nuzzi iD, Francesco Crenna iD, Matteo Lancini iD

Sensors · 2023

DOI: 10.3390/s23136213 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Marco Ghidelli und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Information Engineering, Università degli Studi di Brescia, 25123 Brescia, Italy. Hauptthemen laut MEDLINE: Shoulder Joint. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union, European Union’s Horizon 2020 Research and Innovation Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research paper aimed to validate two methods for measuring loads during walking with instrumented crutches: one method to estimate partial weight-bearing on the lower limbs and another to estimate shoulder joint reactions. Currently, gait laboratories, instrumented with high-end measurement systems, are used to extract kinematic and kinetic data, but such facilities are expensive and not accessible to all patients. The proposed method uses instrumented crutches to measure ground reaction forces and does not require any motion capture devices or force platforms. The load on the lower limbs is estimated by subtracting the forces measured by the crutches from the subject’s total weight. Since the model does not consider inertia contribution in dynamic conditions, the estimation improves with low walking cadence when walking with the two-point contralateral and the three-point partial weight-bearing patterns considered for the validation tests. The shoulder joint reactions are estimated using linear regression, providing accurate values for the forces but less accurate torque estimates. The crutches data are acquired and processed in real-time, allowing for immediate feedback, and the system can be used outdoors in real-world walking conditions. The validation of this method could lead to better monitoring of partial weight-bearing and shoulder joint reactions, which could improve patient outcomes and reduce complications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Shoulder JointHumansCrutchesGaitWalkingWeight-BearingBiomechanical Phenomena

Stichwörter der Autor:innen

biomechanical modelgait analysisinstrumented crutchesload measurementpartial weight-bearingshoulder jointshoulder loadwalking aid

Autor:innen und Institutionen

  • Department of Information Engineering, Università degli Studi di Brescia, 25123 Brescia, Italy.
  • Department of Mechanical and Industrial Engineering, Università degli Studi di Brescia, 25123 Brescia, Italy.
  • Department of Mechanical, Energy, Management and Transport Engineering, Università degli Studi di Genova, 16145 Genova, Italy.
  • Department of Medical and Surgical Specialties, Radiological Sciences, and Public Health, Università degli Studi di Brescia, 25121 Brescia, Italy.

ORCID-Profile: Marco Ghidelli, Cristina Nuzzi, Francesco Crenna, Matteo Lancini

Förderung

  • European Union
  • European Union’s Horizon 2020 Research and Innovation Program

Zitieren

APA

Ghidelli, M., Nuzzi, C., Crenna, F., & Lancini, M. (2023). Validation of Estimators for Weight-Bearing and Shoulder Joint Loads Using Instrumented Crutches. Sensors. https://doi.org/10.3390/s23136213

Vancouver

Ghidelli M, Nuzzi C, Crenna F, Lancini M. Validation of Estimators for Weight-Bearing and Shoulder Joint Loads Using Instrumented Crutches. Sensors. 2023. doi:10.3390/s23136213

BibTeX
@article{Ghidelli2023,
  author = {Ghidelli, Marco and Nuzzi, Cristina and Crenna, Francesco and Lancini, Matteo},
  title = {Validation of Estimators for Weight-Bearing and Shoulder Joint Loads Using Instrumented Crutches},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23136213}
}
Kostenlos starten →