EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Crack Detecting Method Based on Grid-Type Sensing Networks Using Electrical Signals

Ju-Hun Ahn iD, Yong-Chan Lee, Se-Min Jeong iD, Han-Na Kim iD, Chang-Yull Lee

Sensors · 2023

DOI: 10.3390/s23136093 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Ju-Hun Ahn und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, Inha University, Incheon 22212, Republic of Korea. Hauptthemen laut MEDLINE: Computer Systems, Electricity. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korean government (MSIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cracks have a primary effect on the failure of a structure. Therefore, the development of crack sensors with high accuracy and resolution and cracks detection method are important. In this study, the crack sensors were fabricated, and the crack locations were detected with the electrical signal of the crack sensor. First, a metal grid-type micro-crack sensor based on silver was fabricated. The sensor is made with electrohydrodynamics (EHD) inkjet printing technology, which is well known as the next generation of printed electronics technology. Optimal printing conditions were established through experiments, and a grid sensor was obtained. After that, single cracks and multiple cracks were simulated on the sensor, and electrical signals generated from the sensor were measured. The measured electrical signal tracked the location of the cracks in three steps: simple cross-calculation, interpolation, and modified P-SPICE. It was confirmed that cracks could be effectively found and displayed using the method presented in this paper.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Computer SystemsElectricityElectronicsSilverTechnology

Stichwörter der Autor:innen

conductive inkcrack detectingelectrohydrodynamicsmicro-crack sensor

Substanzen

Silver

Autor:innen und Institutionen

  • Department of Aerospace Engineering, Inha University, Incheon 22212, Republic of Korea.
  • Department of Aerospace Engineering, Chosun University, Gwangju 61452, Republic of Korea.
  • Department of Naval Architecture and Ocean Engineering, Chosun University, Gwangju 61452, Republic of Korea.

ORCID-Profile: Ju-Hun Ahn, Se-Min Jeong, Han-Na Kim

Förderung

  • National Research Foundation of Korea
  • Korean government (MSIT)

Zitieren

APA

Ahn, J. H., Lee, Y. C., Jeong, S. M., Kim, H. N., & Lee, C. Y. (2023). Crack Detecting Method Based on Grid-Type Sensing Networks Using Electrical Signals. Sensors. https://doi.org/10.3390/s23136093

Vancouver

Ahn JH, Lee YC, Jeong SM, Kim HN, Lee CY. Crack Detecting Method Based on Grid-Type Sensing Networks Using Electrical Signals. Sensors. 2023. doi:10.3390/s23136093

BibTeX
@article{Ahn2023,
  author = {Ahn, Ju-Hun and Lee, Yong-Chan and Jeong, Se-Min and Kim, Han-Na and Lee, Chang-Yull},
  title = {Crack Detecting Method Based on Grid-Type Sensing Networks Using Electrical Signals},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23136093}
}
Kostenlos starten →