EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nonlinear Dynamic Analysis of a Piezoelectric Energy Harvester with Mechanical Plucking Mechanism

Jinhong Noh, Sungryong Bae iD, Yong-Jin Yoon, Pilkee Kim

Sensors · 2023

DOI: 10.3390/s23135978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Jinhong Noh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea. Hauptthemen laut MEDLINE: Nonlinear Dynamics, Upper Extremity. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chosun University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, we propose an analytical approach based on the modified differential transform method to investigate the dynamic behavior of a plucking energy harvester. The harvester consists of a piezoelectric cantilever oscillator and a rotating plectrum. The analytical approach provides a closed-form solution that helps determine the starting and ending points of the contact phase between the piezoelectric cantilever and the plectrum. This analytical approach is valuable for simulating complex dynamic interferences in multiple or periodic plucking processes. To evaluate the effects of plucking speed and overlap length of the plectrum on single and periodic plucking, a series of simulations were carried out. The output voltage of the piezoelectric energy harvester increases as the overlap length of the plectrum increases. On the other hand, increasing the plucking speed tends to amplify the magnitude of the contact force while reducing the duration of the contact phase. Therefore, it is crucial to optimize the plucking speed to achieve the maximum linear impulse. For periodic plucking, successful synchronization between the motions of the piezoelectric energy harvester and the rotating plectrum must occur within a limited contact zone. Otherwise, dynamic interferences often cause the plectrum to fail to pluck the energy harvester exactly within the contact zone. Additionally, reducing the plucking speed of the plectrum and increasing the overlap length would be more advantageous for successful periodic-plucking energy harvesting.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Nonlinear DynamicsUpper ExtremityPhysical PhenomenaMotion

Stichwörter der Autor:innen

differential transformation methodmechanical plucking mechanismnonlinear dynamic analysispiezoelectric energy harvester

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon 34141, Republic of Korea.
  • Department of Fire Protection and Disaster Management, Chosun University, Gwanju 61452, Republic of Korea.
  • School of Mechanical and Aerospace Engineering, Nanyang Technological University (NTU), Singapore 639798, Singapore.
  • School of Mechanical Design Engineering, College of Engineering, Jeonbuk National University, Jeonju-si 54896, Jeollabuk-do, Republic of Korea.
  • Eco-Friendly Machine Parts Design Research Center, Jeonbuk National University, Jeonju-si 54896, Republic of Korea.

ORCID-Profile: Sungryong Bae

Förderung

  • Chosun University

Zitieren

APA

Noh, J., Bae, S., Yoon, Y. J., & Kim, P. (2023). Nonlinear Dynamic Analysis of a Piezoelectric Energy Harvester with Mechanical Plucking Mechanism. Sensors. https://doi.org/10.3390/s23135978

Vancouver

Noh J, Bae S, Yoon YJ, Kim P. Nonlinear Dynamic Analysis of a Piezoelectric Energy Harvester with Mechanical Plucking Mechanism. Sensors. 2023. doi:10.3390/s23135978

BibTeX
@article{Noh2023,
  author = {Noh, Jinhong and Bae, Sungryong and Yoon, Yong-Jin and Kim, Pilkee},
  title = {Nonlinear Dynamic Analysis of a Piezoelectric Energy Harvester with Mechanical Plucking Mechanism},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23135978}
}
Kostenlos starten →