Image Mapping Accuracy Evaluation Using UAV with Standalone, Differential (RTK), and PPP GNSS Positioning Techniques in an Abandoned Mine Site
Sensors · 24.06.2023 · 23 (13) · 5858
DOI: 10.3390/s23135858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 24.06.2023. Verfasst von Hanjin Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Energy Systems Engineering, Seoul National University, Seoul 08826, Republic of Korea. Hauptthemen laut MEDLINE: Technology. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry, and Energy of the Korean Government, the Korea Institute of Energy Technology Evaluation and Planning (KETEP), the Ministry of Trade, Industry, and Energy of the Korea Government.
Abstract (Originalsprache)
Global navigation satellite systems (GNSSs) provide a common positioning method that utilizes satellite signals to determine the spatial location of a receiver. However, there are several error factors in standalone GNSS positioning due to instrumental, procedural, and environmental factors that arise during the signal transmission process, and the final positioning error can be up to several meters or greater in length. Thus, real-time kinematic (RTK) correction and post-mission precise point positioning (PPP) processing technologies are proposed to improve accuracy and accomplish precise position measurements. To evaluate the geolocation accuracy of mosaicked UAV images of an abandoned mine site, we compared each orthomosaic image and digital elevation model obtained using standalone GNSS positioning, differential (RTK) GNSS positioning, and post-mission PPP processing techniques. In the three types of error evaluation measure (i.e., relative camera location error, ground control points-based absolute image mapping error, and volumetric difference of mine tailings), we found that the RTK GNSS positioning method obtained the best performance in terms of the relative camera location error and the absolute image mapping error evaluations, and the PPP post-processing correction effectively reduced the error (69.5% of the average total relative camera location error and 59.3% of the average total absolute image mapping error) relative to the standalone GNSS positioning method. Although differential (RTK) GNSS positioning is widely used in positioning applications that require very high accuracy, post-mission PPP processing can also be used in various fields in which it is either not feasible to operate expensive equipment to receive RTK GNSS signals or network RTK services are unavailable.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Energy Systems Engineering, Seoul National University, Seoul 08826, Republic of Korea.
- Department of Energy and Mineral Resources Engineering, Dong-A University, Busan 49315, Republic of Korea.
- Department of Energy Resources Engineering, Seoul National University, Seoul 08826, Republic of Korea.
ORCID-Profile: Hyeong-Dong Park, Jongmun Cha
Förderung
- Ministry of Trade, Industry, and Energy of the Korean Government
- the Korea Institute of Energy Technology Evaluation and Planning (KETEP)
- the Ministry of Trade, Industry, and Energy of the Korea Government
- the Korea Government (MOE, MOTIE)
Zitieren
APA
Kim, H., Hyun, C. U., Park, H. D., & Cha, J. (2023). Image Mapping Accuracy Evaluation Using UAV with Standalone, Differential (RTK), and PPP GNSS Positioning Techniques in an Abandoned Mine Site. Sensors, 23(13), 5858. https://doi.org/10.3390/s23135858
Vancouver
Kim H, Hyun CU, Park HD, Cha J. Image Mapping Accuracy Evaluation Using UAV with Standalone, Differential (RTK), and PPP GNSS Positioning Techniques in an Abandoned Mine Site. Sensors. 2023;23(13):5858. doi:10.3390/s23135858
BibTeX
@article{Kim2023,
author = {Kim, Hanjin and Hyun, Chang-Uk and Park, Hyeong-Dong and Cha, Jongmun},
title = {Image Mapping Accuracy Evaluation Using UAV with Standalone, Differential (RTK), and PPP GNSS Positioning Techniques in an Abandoned Mine Site},
journal = {Sensors},
year = {2023},
volume = {23},
number = {13},
pages = {5858},
doi = {10.3390/s23135858}
}
EUVIMED