EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessing Industrial Communication Protocols to Bridge the Gap between Machine Tools and Software Monitoring

Endika Tapia iD, Leonardo Sastoque-Pinilla iD, Unai Lopez-Novoa iD, Iñigo Bediaga, Norberto López de Lacalle iD

Sensors · 18.06.2023 · 23 (12) · 5694

DOI: 10.3390/s23125694 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 18.06.2023. Verfasst von Endika Tapia und 4 weiteren Autor:innen. Beteiligte Einrichtung: Aeronautics Advanced Manufacturing Center, University of the Basque Country, 48940 Leioa, Spain. Hauptthemen laut MEDLINE: Software, Communication. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Basque Government, QUOLINK.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Industrial communication protocols are protocols used to interconnect systems, interfaces, and machines in industrial environments. With the advent of hyper-connected factories, the role of these protocols is gaining relevance, as they enable the real-time acquisition of machine monitoring data, which can fuel real-time data analysis platforms that conduct tasks such as predictive maintenance. However, the effectiveness of these protocols is largely unknown and there is a lack of empirical evaluation which compares their performance. In this work, we evaluate OPC-UA, Modbus, and Ethernet/IP with three machine tools to assess their performance and their complexity of use from a software perspective. Our results show that Modbus provides the best latency figures and communication has different complexities depending on the used protocol, from the software perspective.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SoftwareCommunication

Stichwörter der Autor:innen

data acquisitionindustrial communication protocolsmachine toolsmonitoringperformance evaluation

Autor:innen und Institutionen

  • Aeronautics Advanced Manufacturing Center, University of the Basque Country, 48940 Leioa, Spain.
  • Department of Computer Languages and Systems, University of the Basque Country, 48940 Leioa, Spain.
  • Ideko, 20870 Elgoibar, Spain.
  • Department of Mechanical Engineering, University of the Basque Country, 48940 Leioa, Spain.

ORCID-Profile: Endika Tapia, Leonardo Sastoque-Pinilla, Unai Lopez-Novoa, Norberto López de Lacalle

Förderung

  • Ministerio de Ciencia e Innovación
  • Basque Government
  • QUOLINK
  • Orchesmart- 5G
  • Spanish Ministry of Science and Innovation, and Lanverso

Zitieren

APA

Tapia, E., Sastoque-Pinilla, L., Lopez-Novoa, U., Bediaga, I., & López de Lacalle, N. (2023). Assessing Industrial Communication Protocols to Bridge the Gap between Machine Tools and Software Monitoring. Sensors, 23(12), 5694. https://doi.org/10.3390/s23125694

Vancouver

Tapia E, Sastoque-Pinilla L, Lopez-Novoa U, Bediaga I, López de Lacalle N. Assessing Industrial Communication Protocols to Bridge the Gap between Machine Tools and Software Monitoring. Sensors. 2023;23(12):5694. doi:10.3390/s23125694

BibTeX
@article{Tapia2023,
  author = {Tapia, Endika and Sastoque-Pinilla, Leonardo and Lopez-Novoa, Unai and Bediaga, Iñigo and López de Lacalle, Norberto},
  title = {Assessing Industrial Communication Protocols to Bridge the Gap between Machine Tools and Software Monitoring},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {12},
  pages = {5694},
  doi = {10.3390/s23125694}
}
Kostenlos starten →