Optimization of Tungsten Heavy Alloy Cutting Parameters Based on RSM and Reinforcement Dung Beetle Algorithm
Sensors · 15.06.2023 · 23 (12) · 5616
DOI: 10.3390/s23125616 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 15.06.2023. Verfasst von Xu Zhu und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program, Natural Science Foundation of Ningbo.
Abstract (Originalsprache)
Tungsten heavy alloys (WHAs) are an extremely hard-to-machine material extensively used in demanding applications such as missile liners, aerospace, and optical molds. However, the machining of WHAs remains a challenging task as a result of their high density and elastic stiffness which lead to the deterioration of the machined surface roughness. This paper proposes a brand-new multi-objective dung beetle algorithm. It does not take the cutting parameters (i.e., cutting speed, feed rate, and depth of cut) as the optimization objects but directly optimizes cutting forces and vibration signals monitored using a multi-sensor (i.e., dynamometer and accelerometer). The cutting parameters in the WHA turning process are analyzed through the use of the response surface method (RSM) and the improved dung beetle optimization algorithm. Experimental verification shows that the algorithm has better convergence speed and optimization ability compared with similar algorithms. The optimized forces and vibration are reduced by 9.7% and 46.47%, respectively, and the surface roughness Ra of the machined surface is reduced by 18.2%. The proposed modeling and optimization algorithms are anticipated to be powerful to provide the basis for the parameter optimization in the cutting of WHAs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of High-Performance Precision Manufacturing, Dalian University of Technology, Dalian 116024, China.
- Ningbo Institute of Dalian University of Technology, Ningbo 315000, China.
Förderung
- National Key Research and Development Program
- Natural Science Foundation of Ningbo
Zitieren
APA
Zhu, X., Ni, C., Chen, G., & Guo, J. (2023). Optimization of Tungsten Heavy Alloy Cutting Parameters Based on RSM and Reinforcement Dung Beetle Algorithm. Sensors, 23(12), 5616. https://doi.org/10.3390/s23125616
Vancouver
Zhu X, Ni C, Chen G, Guo J. Optimization of Tungsten Heavy Alloy Cutting Parameters Based on RSM and Reinforcement Dung Beetle Algorithm. Sensors. 2023;23(12):5616. doi:10.3390/s23125616
BibTeX
@article{Zhu2023,
author = {Zhu, Xu and Ni, Chao and Chen, Guilin and Guo, Jiang},
title = {Optimization of Tungsten Heavy Alloy Cutting Parameters Based on RSM and Reinforcement Dung Beetle Algorithm},
journal = {Sensors},
year = {2023},
volume = {23},
number = {12},
pages = {5616},
doi = {10.3390/s23125616}
}
EUVIMED