EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation Methods and Measurement Challenges for Industrial Exoskeletons

Ya-Shian Li-Baboud iD, Ann Virts, Roger Bostelman, Soocheol Yoon iD, Amaan Rahman, Lucia Rhode, Nishat Ahmed, Mili Shah

Sensors · 15.06.2023 · 23 (12) · 5604

DOI: 10.3390/s23125604 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 15.06.2023. Verfasst von Ya-Shian Li-Baboud und 7 weiteren Autor:innen. Beteiligte Einrichtung: National Institute of Standards and Technology, Gaithersburg, MD 20899, USA. Hauptthemen laut MEDLINE: Exoskeleton Device, Spinal Cord Injuries. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, exoskeleton test methods for industrial exoskeletons have evolved to include simulated laboratory and field environments. Physiological, kinematic, and kinetic metrics, as well as subjective surveys, are used to evaluate exoskeleton usability. In particular, exoskeleton fit and usability can also impact the safety of exoskeletons and their effectiveness at reducing musculoskeletal injuries. This paper surveys the state of the art in measurement methods applied to exoskeleton evaluation. A notional classification of the metrics based on exoskeleton fit, task efficiency, comfort, mobility, and balance is proposed. In addition, the paper describes the test and measurement methods used in supporting the development of exoskeleton and exosuit evaluation methods to assess their fit, usability, and effectiveness in industrial tasks such as peg in hole, load align, and applied force. Finally, the paper includes a discussion of how the metrics can be applied towards a systematic evaluation of industrial exoskeletons, current measurement challenges, and future research directions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Exoskeleton DeviceSpinal Cord InjuriesHumansBiomechanical PhenomenaIndustryKinetics

Stichwörter der Autor:innen

evaluation methodsexoskeletonperformance metrics

Autor:innen und Institutionen

  • National Institute of Standards and Technology, Gaithersburg, MD 20899, USA.
  • Smart HLPR LLC, Troutman, NC 28166, USA.
  • Institute for Soft Matter, Georgetown University, Washington, DC 20057, USA.
  • Department of Electrical Engineering, Albert Nerken School of Engineering, The Cooper Union for the Advancement of Science and Art, New York, NY 10003, USA.
  • Department of Mathematics, Albert Nerken School of Engineering, The Cooper Union for the Advancement of Science and Art, New York, NY 10003, USA.

ORCID-Profile: Ya-Shian Li-Baboud, Soocheol Yoon

Zitieren

APA

Li-Baboud, Y. S., Virts, A., Bostelman, R., Yoon, S., Rahman, A., Rhode, L., Ahmed, N., & Shah, M. (2023). Evaluation Methods and Measurement Challenges for Industrial Exoskeletons. Sensors, 23(12), 5604. https://doi.org/10.3390/s23125604

Vancouver

Li-Baboud YS, Virts A, Bostelman R, Yoon S, Rahman A, Rhode L, et al. Evaluation Methods and Measurement Challenges for Industrial Exoskeletons. Sensors. 2023;23(12):5604. doi:10.3390/s23125604

BibTeX
@article{LiBaboud2023,
  author = {Li-Baboud, Ya-Shian and Virts, Ann and Bostelman, Roger and Yoon, Soocheol and Rahman, Amaan and Rhode, Lucia and Ahmed, Nishat and Shah, Mili},
  title = {Evaluation Methods and Measurement Challenges for Industrial Exoskeletons},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {12},
  pages = {5604},
  doi = {10.3390/s23125604}
}
Kostenlos starten →