EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Scalable Lightweight IoT-Based Smart Weather Measurement System

Abdullah Albuali iD, Ramasamy Srinivasagan iD, Ahmed Aljughaiman iD, Fatima Alderazi

Sensors · 14.06.2023 · 23 (12) · 5569

DOI: 10.3390/s23125569 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 14.06.2023. Verfasst von Abdullah Albuali und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Computer Networks and Communications, College of Computer Sciences and Information Technology, King Faisal University, Al-Ahsa 31982, S…. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia, Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Internet of Things (IoT) plays a critical role in remotely monitoring a wide variety of different application sectors, including agriculture, building, and energy. The wind turbine energy generator (WTEG) is a real-world application that can take advantage of IoT technologies, such as a low-cost weather station, where human activities can be significantly affected by enhancing the production of clean energy based on the known direction of the wind. Meanwhile, common weather stations are neither affordable nor customizable for specific applications. Moreover, due to weather forecast changes over time and location within the same city, it is not efficient to rely on a limited number of weather stations that may be located far away from a recipient’s location. Therefore, in this paper, we focus on presenting a low-cost weather station that relies on an artificial intelligence (AI) algorithm that can be distributed across a WTEG area with minimal cost. The proposed study measures multiple weather parameters, such as wind direction, wind velocity (WV), temperature, pressure, mean sea level, and relative humidity to provide current measurements to recipients and AI-based forecasts. In addition, the proposed study consists of several heterogeneous nodes and a controller for each station in a target area. The collected data can be transmitted through Bluetooth low energy (BLE). The experimental results reveal that the proposed study matches the standard of the National Meteorological Center (NMC), with a nowcast measurement of 95% accuracy for WV and 92% for wind direction (WD).

Schlagwörter

Stichwörter der Autor:innen

conventional neural networkdecision treelow-cost weather stationmeteorologytiny machine learning (TinyML)wind speedwind velocity

Autor:innen und Institutionen

  • Department of Computer Networks and Communications, College of Computer Sciences and Information Technology, King Faisal University, Al-Ahsa 31982, Saudi Arabia.
  • Department of Computer Engineering, College of Computer Sciences and Information Technology, King Faisal University, Al-Ahsa 31982, Saudi Arabia.
  • Department of Computer Science, College of Computer Sciences and Information Technology, King Faisal University, Al-Ahsa 31982, Saudi Arabia.

ORCID-Profile: Abdullah Albuali, Ramasamy Srinivasagan, Ahmed Aljughaiman

Förderung

  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia
  • Deputyship for Research & Innovation, Ministry of Education in Saudi Arabia

Zitieren

APA

Albuali, A., Srinivasagan, R., Aljughaiman, A., & Alderazi, F. (2023). Scalable Lightweight IoT-Based Smart Weather Measurement System. Sensors, 23(12), 5569. https://doi.org/10.3390/s23125569

Vancouver

Albuali A, Srinivasagan R, Aljughaiman A, Alderazi F. Scalable Lightweight IoT-Based Smart Weather Measurement System. Sensors. 2023;23(12):5569. doi:10.3390/s23125569

BibTeX
@article{Albuali2023,
  author = {Albuali, Abdullah and Srinivasagan, Ramasamy and Aljughaiman, Ahmed and Alderazi, Fatima},
  title = {Scalable Lightweight IoT-Based Smart Weather Measurement System},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {12},
  pages = {5569},
  doi = {10.3390/s23125569}
}
Kostenlos starten →