Optimizing Yarn Tension in Textile Production with Tension–Position Cascade Control Method Using Kalman Filter
Sensors · 11.06.2023 · 23 (12) · 5494
DOI: 10.3390/s23125494 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 11.06.2023. Verfasst von Ahmed Neaz und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yeungnam University.
Abstract (Originalsprache)
The production of textiles has undergone a considerable transformation, progressing from its primitive origins in hand-weaving to the implementation of contemporary automated systems. Weaving yarn into fabric is a crucial process in the textile industry that requires meticulous attention to output quality products, particularly in the tension control section. The efficiency of the tension controller in relation to the yarn tension significantly affects the quality of the resulting fabric, as proper tension control leads to strong, uniform, and aesthetically pleasing fabric, while poor tension control can cause defects and yarn breakage, leading to production downtime and increased costs. Maintaining the desired yarn tension during textile production is crucial, although it poses several problems, such as the continuous diameter change of the unwinder and rewinder sections leading to system change. Another problem faced by the industrial operation is maintaining proper tension on the yarn while changing the roll-to-roll operation velocity. In this paper, an optimized method for controlling yarn tension through the cascade control of tension and position, incorporating feedback controllers, feedforward, and disturbance observers, has been proposed to make the system more robust and suitable for industrial use. In addition, an optimum signal processor has been designed to obtain sensor data with reduced noise and minimal phase difference.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.
- Energy System Research Center, Korea Textile Machinery Convergence Research Institute, Gyeongsan 38542, Republic of Korea.
ORCID-Profile: Tae Hwan Jin
Förderung
- Yeungnam University
Zitieren
APA
Neaz, A., Lee, E. H., Jin, T. H., Cho, K. C., & Nam, K. (2023). Optimizing Yarn Tension in Textile Production with Tension–Position Cascade Control Method Using Kalman Filter. Sensors, 23(12), 5494. https://doi.org/10.3390/s23125494
Vancouver
Neaz A, Lee EH, Jin TH, Cho KC, Nam K. Optimizing Yarn Tension in Textile Production with Tension–Position Cascade Control Method Using Kalman Filter. Sensors. 2023;23(12):5494. doi:10.3390/s23125494
BibTeX
@article{Neaz2023,
author = {Neaz, Ahmed and Lee, Eun Ha and Jin, Tae Hwan and Cho, Kyung Chul and Nam, Kanghyun},
title = {Optimizing Yarn Tension in Textile Production with Tension–Position Cascade Control Method Using Kalman Filter},
journal = {Sensors},
year = {2023},
volume = {23},
number = {12},
pages = {5494},
doi = {10.3390/s23125494}
}
EUVIMED