EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Electromyography-Driven Parameters for Representing Muscle Mass and Strength

Joo Hye Sung iD, Seol-Hee Baek, Jin-Woo Park iD, Jeong Hwa Rho, Byung-Jo Kim iD

Sensors · 2023

DOI: 10.3390/s23125490 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Joo Hye Sung und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Neurology, Korea University Anam Hospital, Korea University College of Medicine, Seoul 02841, Republic of Korea. Hauptthemen laut MEDLINE: Muscle, Skeletal, Elbow Joint. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Industrial Technology Innovation Program, Ministry of Trade, Industry & Energy (Republic of Korea).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The need for developing a simple and effective assessment tool for muscle mass has been increasing in a rapidly aging society. This study aimed to evaluate the feasibility of the surface electromyography (sEMG) parameters for estimating muscle mass. Overall, 212 healthy volunteers participated in this study. Maximal voluntary contraction (MVC) strength and root mean square (RMS) values of motor unit potentials from surface electrodes on each muscle (biceps brachii, triceps brachii, biceps femoris, rectus femoris) during isometric exercises of elbow flexion (EF), elbow extension (EE), knee flexion (KF), knee extension (KE) were acquired. New variables (MeanRMS, MaxRMS, and RatioRMS) were calculated from RMS values according to each exercise. Bioimpedance analysis (BIA) was performed to determine the segmental lean mass (SLM), segmental fat mass (SFM), and appendicular skeletal muscle mass (ASM). Muscle thicknesses were measured using ultrasonography (US). sEMG parameters showed positive correlations with MVC strength, SLM, ASM, and muscle thickness measured by US, but showed negative correlations with SFM. An equation was developed for ASM: ASM = −26.04 + 20.345 × Height + 0.178 × weight − 2.065 × (1, if female; 0, if male) + 0.327 × RatioRMS(KF) + 0.965 × MeanRMS(EE) (SEE = 1.167, adjusted R2 = 0.934). sEMG parameters in controlled conditions may represent overall muscle strength and muscle mass in healthy individuals.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Muscle, SkeletalElbow JointHumansMaleFemaleElectromyographyElbowArmMuscle StrengthIsometric ContractionMuscle Contraction

Stichwörter der Autor:innen

electromyographyisometric exercisemuscle strengthskeletal muscle mass

Autor:innen und Institutionen

  • Department of Neurology, Korea University Anam Hospital, Korea University College of Medicine, Seoul 02841, Republic of Korea.
  • BK21FOUR R&E Center for Learning Health Systems, Korea University, Seoul 02841, Republic of Korea.

ORCID-Profile: Joo Hye Sung, Jin-Woo Park, Byung-Jo Kim

Förderung

  • Ministry of Trade, Industry and Energy
  • Industrial Technology Innovation Program
  • Ministry of Trade, Industry & Energy (Republic of Korea)

Zitieren

APA

Sung, J. H., Baek, S. H., Park, J. W., Rho, J. H., & Kim, B. J. (2023). Surface Electromyography-Driven Parameters for Representing Muscle Mass and Strength. Sensors. https://doi.org/10.3390/s23125490

Vancouver

Sung JH, Baek SH, Park JW, Rho JH, Kim BJ. Surface Electromyography-Driven Parameters for Representing Muscle Mass and Strength. Sensors. 2023. doi:10.3390/s23125490

BibTeX
@article{Sung2023,
  author = {Sung, Joo Hye and Baek, Seol-Hee and Park, Jin-Woo and Rho, Jeong Hwa and Kim, Byung-Jo},
  title = {Surface Electromyography-Driven Parameters for Representing Muscle Mass and Strength},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23125490}
}
Kostenlos starten →