EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma–Delta MEMS Capacitive Accelerometers

Xuefeng Wang, Penghao Zhang, Shijin Ding

Sensors · 2023

DOI: 10.3390/s23125394 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Xuefeng Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai 200433, China. Hauptthemen laut MEDLINE: Micro-Electrical-Mechanical Systems. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The high-order mechanical resonances of the sensing element in a high-vacuum environment can significantly degrade the noise and distortion performance of seismic-grade sigma–delta MEMS capacitive accelerometers. However, the current modeling approach is unable to evaluate the effects of high-order mechanical resonances. This study proposes a novel multiple-degree-of-freedom (MDOF) model to evaluate the noise and distortion induced by high-order mechanical resonances. Firstly, the MDOF dynamic equations of the sensing element are derived using the principle of modal superposition and Lagrange’s equations. Secondly, a fifth-order electromechanical sigma–delta system of the MEMS accelerometer is established in Simulink based on the dynamic equations of the sensing element. Then, the mechanism through which the high-order mechanical resonances degrade the noise and distortion performances is discovered by analyzing the simulated result. Finally, a noise and distortion suppression method is proposed based on the appropriate improvement in high-order natural frequency. The results show that the low-frequency noise drastically decreases from about −120.5 dB to −175.3 dB after the high-order natural frequency increases from about 130 kHz to 455 kHz. The harmonic distortion also reduces significantly.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Micro-Electrical-Mechanical SystemsComputer SimulationRecordsVacuumAccelerometry

Stichwörter der Autor:innen

MEMS accelerometerselectromechanical modelingmultiple-degree-of-freedomnoisesigma–delta

Autor:innen und Institutionen

  • State Key Laboratory of ASIC and System, School of Microelectronics, Fudan University, Shanghai 200433, China.

Zitieren

APA

Wang, X., Zhang, P., & Ding, S. (2023). Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma–Delta MEMS Capacitive Accelerometers. Sensors. https://doi.org/10.3390/s23125394

Vancouver

Wang X, Zhang P, Ding S. Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma–Delta MEMS Capacitive Accelerometers. Sensors. 2023. doi:10.3390/s23125394

BibTeX
@article{Wang2023,
  author = {Wang, Xuefeng and Zhang, Penghao and Ding, Shijin},
  title = {Multiple-Degree-of-Freedom Modeling and Simulation for Seismic-Grade Sigma–Delta MEMS Capacitive Accelerometers},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23125394}
}
Kostenlos starten →