EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Review of NDT Methods for Wheel Burn Detection on Rails

Yanbo Zhang iD, Xiubo Liu, Longhui Xiong, Zhuo Chen, Jianmei Wei

Sensors · 31.05.2023 · 23 (11) · 5240

DOI: 10.3390/s23115240 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Sensors, online erschienen am 31.05.2023. Verfasst von Yanbo Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Postgraduate Department, China Academy of Railway Sciences, Beijing 100081, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 145 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Science and Technology Research and Development Program of China State Railway Group Co., Ltd., Science and Technology Research and Development Program of China State Railway Group Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wheel burn can affect the wheel–rail contact state and ride quality. With long-term operation, it can cause rail head spalling or transverse cracking, which will lead to rail breakage. By analyzing the relevant literature on wheel burn, this paper reviews the characteristics, mechanism of formation, crack extension, and NDT methods of wheel burn. The results are as follows: Thermal-induced, plastic-deformation-induced, and thermomechanical-induced mechanisms have been proposed by researchers; among them, the thermomechanical-induced wheel burn mechanism is more probable and convincing. Initially, the wheel burns appear as an elliptical or strip-shaped white etching layer with or without deformation on the running surface of the rails. In the latter stages of development, this may cause cracks, spalling, etc. Magnetic Flux Leakage Testing, Magnetic Barkhausen Noise Testing, Eddy Current Testing, Acoustic Emission Testing, and Infrared Thermography Testing can identify the white etching layer, and surface and near-surface cracks. Automatic Visual Testing can detect the white etching layer, surface cracks, spalling, and indentation, but cannot detect the depth of rail defects. Axle Box Acceleration Measurement can be used to detect severe wheel burn with deformation.

Schlagwörter

Stichwörter der Autor:innen

NDTmechanism of formationrail defectwheel burnwhite etching layer

Autor:innen und Institutionen

  • Postgraduate Department, China Academy of Railway Sciences, Beijing 100081, China.
  • Infrastructure Inspection Research Institute, China Academy of Railway Sciences Corporation Limited, Beijing 100081, China.

ORCID-Profile: Yanbo Zhang

Förderung

  • the Science and Technology Research and Development Program of China State Railway Group Co., Ltd.
  • Science and Technology Research and Development Program of China State Railway Group Co., Ltd.

Zitieren

APA

Zhang, Y., Liu, X., Xiong, L., Chen, Z., & Wei, J. (2023). A Review of NDT Methods for Wheel Burn Detection on Rails. Sensors, 23(11), 5240. https://doi.org/10.3390/s23115240

Vancouver

Zhang Y, Liu X, Xiong L, Chen Z, Wei J. A Review of NDT Methods for Wheel Burn Detection on Rails. Sensors. 2023;23(11):5240. doi:10.3390/s23115240

BibTeX
@article{Zhang2023,
  author = {Zhang, Yanbo and Liu, Xiubo and Xiong, Longhui and Chen, Zhuo and Wei, Jianmei},
  title = {A Review of NDT Methods for Wheel Burn Detection on Rails},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {11},
  pages = {5240},
  doi = {10.3390/s23115240}
}
Kostenlos starten →