Bayesian-Optimized Hybrid Kernel SVM for Rolling Bearing Fault Diagnosis
Sensors · 28.05.2023 · 23 (11) · 5137
DOI: 10.3390/s23115137 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 28.05.2023. Verfasst von Xinmin Song und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Engineering, Nanjing Agricultural University, Nanjing 210031, China. Die Arbeit wurde bisher 54-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Jiangsu International Science and Technology Cooperation Project, the Agricultural Science and Technology Independent Innovation Fund of Jiangsu Province, the National key research and development program.
Abstract (Originalsprache)
We propose a new fault diagnosis model for rolling bearings based on a hybrid kernel support vector machine (SVM) and Bayesian optimization (BO). The model uses discrete Fourier transform (DFT) to extract fifteen features from vibration signals in the time and frequency domains of four bearing failure forms, which addresses the issue of ambiguous fault identification caused by their nonlinearity and nonstationarity. The extracted feature vectors are then divided into training and test sets as SVM inputs for fault diagnosis. To optimize the SVM, we construct a hybrid kernel SVM using a polynomial kernel function and radial basis kernel function. BO is used to optimize the extreme values of the objective function and determine their weight coefficients. We create an objective function for the Gaussian regression process of BO using training and test data as inputs, respectively. The optimized parameters are used to rebuild the SVM, which is then trained for network classification prediction. We tested the proposed diagnostic model using the bearing dataset of the Case Western Reserve University. The verification results show that the fault diagnosis accuracy is improved from 85% to 100% compared with the direct input of vibration signal into the SVM, and the effect is significant. Compared with other diagnostic models, our Bayesian-optimized hybrid kernel SVM model has the highest accuracy. In laboratory verification, we took sixty sets of sample values for each of the four failure forms measured in the experiment, and the verification process was repeated. The experimental results showed that the accuracy of the Bayesian-optimized hybrid kernel SVM reached 100%, and the accuracy of five replicates reached 96.7%. These results demonstrate the feasibility and superiority of our proposed method for fault diagnosis in rolling bearings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Engineering, Nanjing Agricultural University, Nanjing 210031, China.
- College of Mechanical and Electronic Engineering, Nanjing Forestry University, Nanjing 210037, China.
- Essen Agricultural Machinery Changzhou Co., Ltd., Changzhou 213000, China.
- Faculty of Mechanical Engineering, Ghulam Ishaq Khan Institute of Engineering Sciences & Technology, Topi 23460, Pakistan.
ORCID-Profile: Weihua Wei, Maohua Xiao
Förderung
- the Jiangsu International Science and Technology Cooperation Project
- the Agricultural Science and Technology Independent Innovation Fund of Jiangsu Province
- the National key research and development program
- Jiangsu International Science and Technology Cooperation Project
- Agricultural Science and Technology Independent Innovation Fund of Jiangsu Province
- National key research and development program
Zitieren
APA
Song, X., Wei, W., Zhou, J., Ji, G., Hussain, G., Xiao, M., & Geng, G. (2023). Bayesian-Optimized Hybrid Kernel SVM for Rolling Bearing Fault Diagnosis. Sensors, 23(11), 5137. https://doi.org/10.3390/s23115137
Vancouver
Song X, Wei W, Zhou J, Ji G, Hussain G, Xiao M, et al. Bayesian-Optimized Hybrid Kernel SVM for Rolling Bearing Fault Diagnosis. Sensors. 2023;23(11):5137. doi:10.3390/s23115137
BibTeX
@article{Song2023,
author = {Song, Xinmin and Wei, Weihua and Zhou, Junbo and Ji, Guojun and Hussain, Ghulam and Xiao, Maohua and Geng, Guosheng},
title = {Bayesian-Optimized Hybrid Kernel SVM for Rolling Bearing Fault Diagnosis},
journal = {Sensors},
year = {2023},
volume = {23},
number = {11},
pages = {5137},
doi = {10.3390/s23115137}
}
EUVIMED