EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hardware-Efficient Scheme for Trailer Robot Parking by Truck Robot in an Indoor Environment with Rendezvous

Divya Vani G iD, Srinivasa Rao Karumuri iD, Chinnaiah M C iD, Siew-Kei Lam, Janardhan Narambhatlu, Sanjay Dubey

Sensors · 2023

DOI: 10.3390/s23115097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Divya Vani G und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Green Fields, Vaddeswaram 522502, India. Hauptthemen laut MEDLINE: Robotics. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Engineering Research Board.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Autonomous grounded vehicle-based social assistance/service robot parking in an indoor environment is an exciting challenge in urban cities. There are few efficient methods for parking multi-robot/agent teams in an unknown indoor environment. The primary objective of autonomous multi-robot/agent teams is to establish synchronization between them and to stay in behavioral control when static and when in motion. In this regard, the proposed hardware-efficient algorithm addresses the parking of a trailer (follower) robot in indoor environments by a truck (leader) robot with a rendezvous approach. In the process of parking, initial rendezvous behavioral control between the truck and trailer robots is established. Next, the parking space in the environment is estimated by the truck robot, and the trailer robot parks under the supervision of the truck robot. The proposed behavioral control mechanisms were executed between heterogenous-type computational-based robots. Optimized sensors were used for traversing and the execution of the parking methods. The truck robot leads, and the trailer robot mimics the actions in the execution of path planning and parking. The truck robot was integrated with FPGA (Xilinx Zynq XC7Z020-CLG484-1), and the trailer was integrated with Arduino UNO computing devices; this heterogenous modeling is adequate in the execution of trailer parking by a truck. The hardware schemes were developed using Verilog HDL for the FPGA (truck)-based robot and Python for the Arduino (trailer)-based robot.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

RoboticsMotor VehiclesAlgorithmsComputersCities

Stichwörter der Autor:innen

FPGAparkingrendezvous behavioral controltrailer robot

Autor:innen und Institutionen

  • Department of Electronics and Communication Engineering, Koneru Lakshmaiah Education Foundation, Green Fields, Vaddeswaram 522502, India.
  • Department of Electronics and Communication Engineering, B V Raju Institute of Technology, Medak 502313, India.
  • School of Computer Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore.
  • Department of Mechanical Engineering, Chaitanya Bharati Institute of Technology, Hyderabad 500075, India.

ORCID-Profile: Divya Vani G, Srinivasa Rao Karumuri, Chinnaiah M C

Förderung

  • Science and Engineering Research Board

Zitieren

APA

G, D. V., Karumuri, S. R., C, C. M., Lam, S. K., Narambhatlu, J., & Dubey, S. (2023). Hardware-Efficient Scheme for Trailer Robot Parking by Truck Robot in an Indoor Environment with Rendezvous. Sensors. https://doi.org/10.3390/s23115097

Vancouver

G DV, Karumuri SR, C CM, Lam SK, Narambhatlu J, Dubey S. Hardware-Efficient Scheme for Trailer Robot Parking by Truck Robot in an Indoor Environment with Rendezvous. Sensors. 2023. doi:10.3390/s23115097

BibTeX
@article{G2023,
  author = {G, Divya Vani and Karumuri, Srinivasa Rao and C, Chinnaiah M and Lam, Siew-Kei and Narambhatlu, Janardhan and Dubey, Sanjay},
  title = {Hardware-Efficient Scheme for Trailer Robot Parking by Truck Robot in an Indoor Environment with Rendezvous},
  journal = {Sensors},
  year = {2023},
  doi = {10.3390/s23115097}
}
Kostenlos starten →