Energy-Efficient and Variability-Resilient 11T SRAM Design Using Data-Aware Read–Write Assist (DARWA) Technique for Low-Power Applications
Sensors · 26.05.2023 · 23 (11) · 5095
DOI: 10.3390/s23115095 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 26.05.2023. Verfasst von Sargunam Thirugnanam und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering and Computing, Manipal International University, Nilai 71800, Malaysia. Hauptthemen laut MEDLINE: Computers, Handheld. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The need for power-efficient devices, such as smart sensor nodes, mobile devices, and portable digital gadgets, is markedly increasing and these devices are becoming commonly used in daily life. These devices continue to demand an energy-efficient cache memory designed on Static Random-Access Memory (SRAM) with enhanced speed, performance, and stability to perform on-chip data processing and faster computations. This paper presents an energy-efficient and variability-resilient 11T (E2VR11T) SRAM cell, which is designed with a novel Data-Aware Read–Write Assist (DARWA) technique. The E2VR11T cell comprises 11 transistors and operates with single-ended read and dynamic differential write circuits. The simulated results in a 45 nm CMOS technology exhibit 71.63% and 58.77% lower read energy than ST9T and LP10T and lower write energies of 28.25% and 51.79% against S8T and LP10T cells, respectively. The leakage power is reduced by 56.32% and 40.90% compared to ST9T and LP10T cells. The read static noise margin (RSNM) is improved by 1.94× and 0.18×, while the write noise margin (WNM) is improved by 19.57% and 8.70% against C6T and S8T cells. The variability investigation using the Monte Carlo simulation on 5000 samples highly validates the robustness and variability resilience of the proposed cell. The improved overall performance of the proposed E2VR11T cell makes it suitable for low-power applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering and Computing, Manipal International University, Nilai 71800, Malaysia.
- Faculty of Engineering and Technology, Multimedia University, Melaka 75450, Malaysia.
- Electronics and Communication Engineering Department, NIIT University, Alwar 301705, India.
Zitieren
APA
Thirugnanam, S., Soong, L. W., Prabhu, C. M., & Singh, A. K. (2023). Energy-Efficient and Variability-Resilient 11T SRAM Design Using Data-Aware Read–Write Assist (DARWA) Technique for Low-Power Applications. Sensors, 23(11), 5095. https://doi.org/10.3390/s23115095
Vancouver
Thirugnanam S, Soong LW, Prabhu CM, Singh AK. Energy-Efficient and Variability-Resilient 11T SRAM Design Using Data-Aware Read–Write Assist (DARWA) Technique for Low-Power Applications. Sensors. 2023;23(11):5095. doi:10.3390/s23115095
BibTeX
@article{Thirugnanam2023,
author = {Thirugnanam, Sargunam and Soong, Lim Way and Prabhu, Chinnaraj Munirathina and Singh, Ajay Kumar},
title = {Energy-Efficient and Variability-Resilient 11T SRAM Design Using Data-Aware Read–Write Assist (DARWA) Technique for Low-Power Applications},
journal = {Sensors},
year = {2023},
volume = {23},
number = {11},
pages = {5095},
doi = {10.3390/s23115095}
}
EUVIMED