Simulation and Optimization Design of Inductive Wear Particle Sensor
Sensors · 19.05.2023 · 23 (10) · 4890
DOI: 10.3390/s23104890 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 19.05.2023. Verfasst von Bin Fan und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical & Electrical Engineering, Inner Mongolia Agricultural University, Hohhot 010018, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Natural Science Foundation of China under Grant, the Inner Mongolia Natural Science Foundation, Inner Mongolia Autonomous Region Military-civilian Integration Key Scientific Research Projects and Soft Scientific Research Projects.
Abstract (Originalsprache)
In order to monitor the diagnosis of mechanical equipment by monitoring the metal wear particles carried in large aperture lubricating oil tubes, the simulation optimization structure design was carried out based on the traditional three-coil inductance wear particle sensor. The numerical model of electromotive force induced by the wear particle sensor was established, and the coil distance and coil turns were simulated by finite element analysis software. When permalloy is covered on the surface of the excitation coil and induction coil, the background magnetic field at the air gap increases, and the induced electromotive force amplitude generated by wear particles is increased. The effect of alloy thickness on the induced voltage and magnetic field was analyzed to determine the optimum thickness, and increase the induction voltage of the alloy chamfer detection at the air gap. The optimal parameter structure was determined to improve the detection ability of the sensor. Ultimately, by comparing the extreme values of the induced voltage of various types of sensors, the simulation determined that the minimum allowable detection of the optimal sensor was 27.5 µm ferromagnetic particles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical & Electrical Engineering, Inner Mongolia Agricultural University, Hohhot 010018, China.
- National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology, Baotou 014030, China.
- School of Advanced Manufacturing Engineering, Chongqing University of Posts and Telecommunications, Chongqing 400065, China.
Förderung
- the National Natural Science Foundation of China under Grant
- the Inner Mongolia Natural Science Foundation
- Inner Mongolia Autonomous Region Military-civilian Integration Key Scientific Research Projects and Soft Scientific Research Projects
- the State Key Laboratory of Smart Manufacturing for Special Vehicles and Transmission System under Grant
- National Key Laboratory of Special Vehicle Design and Manufacturing Integration Technology
- National Natural Science Foundation of China
- Inner Mongolia Natural Science Foundation
- Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region
Zitieren
APA
Fan, B., Wang, L., Liu, Y., Zhang, P., & Feng, S. (2023). Simulation and Optimization Design of Inductive Wear Particle Sensor. Sensors, 23(10), 4890. https://doi.org/10.3390/s23104890
Vancouver
Fan B, Wang L, Liu Y, Zhang P, Feng S. Simulation and Optimization Design of Inductive Wear Particle Sensor. Sensors. 2023;23(10):4890. doi:10.3390/s23104890
BibTeX
@article{Fan2023,
author = {Fan, Bin and Wang, Lianfu and Liu, Yong and Zhang, Peng and Feng, Song},
title = {Simulation and Optimization Design of Inductive Wear Particle Sensor},
journal = {Sensors},
year = {2023},
volume = {23},
number = {10},
pages = {4890},
doi = {10.3390/s23104890}
}
EUVIMED