EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Shaping Perpendicular Magnetic Anisotropy of Co2MnGa Heusler Alloy Using Ion Irradiation for Magnetic Sensor Applications

Anmol Mahendra iD, Peter P Murmu, Susant Kumar Acharya, Atif Islam iD, Holger Fiedler iD, Prasanth Gupta, Simon Granville iD, John Kennedy iD

Sensors · 08.05.2023 · 23 (9) · 4564

DOI: 10.3390/s23094564 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 08.05.2023. Verfasst von Anmol Mahendra und 7 weiteren Autor:innen. Beteiligte Einrichtung: Robinson Research Institute, Victoria University of Wellington, Wellington 6140, New Zealand. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 117 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Business, Innovation and Employment.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic sensors are key elements in many industrial, security, military, and biomedical applications. Heusler alloys are promising materials for magnetic sensor applications due to their high spin polarization and tunable magnetic properties. The dynamic field range of magnetic sensors is strongly related to the perpendicular magnetic anisotropy (PMA). By tuning the PMA, it is possible to modify the sensing direction, sensitivity and even the accuracy of the magnetic sensors. Here, we report the tuning of PMA in a Co2MnGa Heusler alloy film via argon (Ar) ion irradiation. MgO/Co2MnGa/Pd films with an initial PMA were irradiated with 30 keV 40Ar+ ions with fluences (ions·cm−2) between 1 × 1013 and 1 × 1015 Ar·cm−2, which corresponds to displacement per atom values between 0.17 and 17, estimated from Monte-Carlo-based simulations. The magneto optical and magnetization results showed that the effective anisotropy energy (Keff) decreased from ~153 kJ·m−3 for the un-irradiated film to ~14 kJ·m−3 for the 1 × 1014 Ar·cm−2 irradiated film. The reduced Keff and PMA are attributed to ion-irradiation-induced interface intermixing that decreased the interfacial anisotropy. These results demonstrate that ion irradiation is a promising technique for shaping the PMA of Co2MnGa Heusler alloy for magnetic sensor applications.

Schlagwörter

Stichwörter der Autor:innen

Co2MnGaHeusler alloydisplacement per atomeffective anisotropy energyinterface intermixingion irradiationmagnetic sensormagnetic tunnel junctionperpendicular magnetic anisotropy

Autor:innen und Institutionen

  • Robinson Research Institute, Victoria University of Wellington, Wellington 6140, New Zealand.
  • National Isotope Centre, GNS Science, Lower Hutt 5010, New Zealand.
  • The MacDiarmid Institute for Advanced Materials and Nanotechnology, Wellington 6140, New Zealand.

ORCID-Profile: Anmol Mahendra, Atif Islam, Holger Fiedler, Simon Granville, John Kennedy

Förderung

  • Ministry of Business, Innovation and Employment

Zitieren

APA

Mahendra, A., Murmu, P. P., Acharya, S. K., Islam, A., Fiedler, H., Gupta, P., Granville, S., & Kennedy, J. (2023). Shaping Perpendicular Magnetic Anisotropy of Co2MnGa Heusler Alloy Using Ion Irradiation for Magnetic Sensor Applications. Sensors, 23(9), 4564. https://doi.org/10.3390/s23094564

Vancouver

Mahendra A, Murmu PP, Acharya SK, Islam A, Fiedler H, Gupta P, et al. Shaping Perpendicular Magnetic Anisotropy of Co2MnGa Heusler Alloy Using Ion Irradiation for Magnetic Sensor Applications. Sensors. 2023;23(9):4564. doi:10.3390/s23094564

BibTeX
@article{Mahendra2023,
  author = {Mahendra, Anmol and Murmu, Peter P and Acharya, Susant Kumar and Islam, Atif and Fiedler, Holger and Gupta, Prasanth and Granville, Simon and Kennedy, John},
  title = {Shaping Perpendicular Magnetic Anisotropy of Co2MnGa Heusler Alloy Using Ion Irradiation for Magnetic Sensor Applications},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {9},
  pages = {4564},
  doi = {10.3390/s23094564}
}
Kostenlos starten →