EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Active Cooling System for Internal Combustion Engine Using Shape Memory Alloy Based Thermostat

Pacifique Turabimana iD, Jung Woo Sohn, Seung-Bok Choi iD

Sensors · 13.04.2023 · 23 (8) · 3972

DOI: 10.3390/s23083972 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 13.04.2023. Verfasst von Pacifique Turabimana und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aeronautics, Mechanical and Electronic Convergence Engineering, Graduate School, Kumoh National Institute of Technology, Gumi 39177, Re…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea National Research Foundation, MSIT (Ministry of Science and ICT), Korea, National Research Foundation of Korea (NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pollutants in exhaust gases and the high fuel consumption of internal combustion engines remain key issues in the automotive industry despite the emergence of electric vehicles. Engine overheating is a major cause of these problems. Traditionally, engine overheating was solved using electric pumps and cooling fans with electrically operated thermostats. This method can be applied using active cooling systems that are currently available on the market. However, the performance of this method is undermined by its delayed response time to activate the main valve of the thermostat and the dependence of the coolant flow direction control on the engine. This study proposes a novel active engine cooling system incorporating a shape memory alloy-based thermostat. After discussing the operating principles, the governing equations of motion were formulated and analyzed using COMSOL Multiphysics and MATLAB. The results show that the proposed method improved the response time required to change the coolant flow direction and led to a coolant temperature difference of 4.90 °C at 90 °C cooling conditions. This result indicates that the proposed system can be applied to existing internal combustion engines to enhance their performance in terms of reduced pollution and fuel consumption.

Schlagwörter

Stichwörter der Autor:innen

active cooling systeminternal combustion engineshape memory alloythermostat

Autor:innen und Institutionen

  • Department of Aeronautics, Mechanical and Electronic Convergence Engineering, Graduate School, Kumoh National Institute of Technology, Gumi 39177, Republic of Korea.
  • Department of Mechanical Design Engineering, Kumoh National Institute of Technology, Daehak-Ro 61, Gumi 39177, Republic of Korea.
  • Department of Mechanical Engineering, The State University of New York, Korea (SUNY Korea), Songdo Moonhwa-Ro, Incheon 21985, Republic of Korea.
  • Department of Mechanical Engineering, Industrial University of Ho Chi Minh City (IUH), 12 Nguyen Van Bao Street, Ho Chi Minh City 70000, Vietnam.

ORCID-Profile: Pacifique Turabimana, Seung-Bok Choi

Förderung

  • Korea National Research Foundation
  • MSIT (Ministry of Science and ICT), Korea
  • National Research Foundation of Korea (NRF)

Zitieren

APA

Turabimana, P., Sohn, J. W., & Choi, S. B. (2023). A Novel Active Cooling System for Internal Combustion Engine Using Shape Memory Alloy Based Thermostat. Sensors, 23(8), 3972. https://doi.org/10.3390/s23083972

Vancouver

Turabimana P, Sohn JW, Choi SB. A Novel Active Cooling System for Internal Combustion Engine Using Shape Memory Alloy Based Thermostat. Sensors. 2023;23(8):3972. doi:10.3390/s23083972

BibTeX
@article{Turabimana2023,
  author = {Turabimana, Pacifique and Sohn, Jung Woo and Choi, Seung-Bok},
  title = {A Novel Active Cooling System for Internal Combustion Engine Using Shape Memory Alloy Based Thermostat},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {8},
  pages = {3972},
  doi = {10.3390/s23083972}
}
Kostenlos starten →