EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sensorless Model Predictive Control of Single-Phase Inverter for UPS Applications via Accurate Load Current Estimation

Po Li, Xiaoshan Tong, Zhoujing Wang, Maoguang Xu, Jianfeng Zhu

Sensors · 04.04.2023 · 23 (7) · 3742

DOI: 10.3390/s23073742 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 04.04.2023. Verfasst von Po Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Aerospace Engineering, Xiamen University, Xiamen 361102, China. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Single-phase inverters with an output LC filter, can generate low distortion output voltages, which are suitable for uninterruptible power supply (UPS) systems. The UPS system provides emergency power in the case of utility power failure, requiring high reliability and clean power. The sensorless control method is actually a soft-sensing technique, that reduces system cost, measurement-related losses, and, especially important for UPS systems, enhances the system reliability. This paper proposes a load current sensorless finite control set model predictive control (FCS-MPC) scheme for a single-phase UPS inverter. A time varying observer is proposed, which offers the accurate estimation for individual components simultaneously in periodic load current signal, without subsequent complex calculations. Compared with another two typical sensorless methods (the low-pass filter and the Kalman filter), the proposed observer-based FCS-MPC strategy has smaller load current estimation error and lower output voltage distortion, under both linear and nonlinear loads. The theoretical analysis is verified through simulation and experiment. A single-phase inverter rapid control prototype (RCP) is set up with the Speedgoat real-time target machine, to confirm the effectiveness of the system.

Schlagwörter

Stichwörter der Autor:innen

load current estimationload current sensorless controlmodel predictive controlobserveruninterruptible power supply

Autor:innen und Institutionen

  • School of Aerospace Engineering, Xiamen University, Xiamen 361102, China.

Förderung

  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China

Zitieren

APA

Li, P., Tong, X., Wang, Z., Xu, M., & Zhu, J. (2023). Sensorless Model Predictive Control of Single-Phase Inverter for UPS Applications via Accurate Load Current Estimation. Sensors, 23(7), 3742. https://doi.org/10.3390/s23073742

Vancouver

Li P, Tong X, Wang Z, Xu M, Zhu J. Sensorless Model Predictive Control of Single-Phase Inverter for UPS Applications via Accurate Load Current Estimation. Sensors. 2023;23(7):3742. doi:10.3390/s23073742

BibTeX
@article{Li2023,
  author = {Li, Po and Tong, Xiaoshan and Wang, Zhoujing and Xu, Maoguang and Zhu, Jianfeng},
  title = {Sensorless Model Predictive Control of Single-Phase Inverter for UPS Applications via Accurate Load Current Estimation},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {7},
  pages = {3742},
  doi = {10.3390/s23073742}
}
Kostenlos starten →