EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Approach of Vibration Compensation for Atomic Gravimeter under Complex Vibration Environment

Hao Che iD, An Li, Zhu Zhou, Wenbin Gong iD, Jinxiu Ma, Fangjun Qin

Sensors · 28.03.2023 · 23 (7) · 3535

DOI: 10.3390/s23073535 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 28.03.2023. Verfasst von Hao Che und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Electrical Engineering, Naval University of Engineering, No.717 Jiefang Road, Wuhan 430033, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Atomic gravimeter has been more frequently applied under complex and dynamic environments, but its measurement accuracy is seriously hampered by vibration-induced noise. In this case, vibration compensation provides a way to enhance the accuracy of gravity measurements by correcting the phase noise that resulted from the vibration of a Raman reflector, and improving the fitting of an interference fringe. An accurate estimation of the transfer function of vibration between the Raman reflector and the sensor plays a significant role in optimizing the effect of vibration compensation. For this reason, a vibration compensation approach was explored based on EO (equilibrium optimizer) for estimating the transfer function simplified model of a Raman reflector, and it was used to correct the interference fringe of an atomic gravimeter. The test results revealed that this approach greatly restored the actual vibration of the Raman reflector in a complex vibration environment. With a vibration compensation algorithm, it achieved the correction and fitting of the original interference fringe. In general, it dramatically reduced the RMSE (root mean square error) at the time of fitting and significantly improved the residual error in the gravity measurement. Compared with other conventional algorithms, such as GA (genetic algorithm) and PSO (particle swarm optimization), this approach realized a faster convergence and better optimization, so as to ensure more accurate gravity measurements. The study of this vibration compensation approach could provide a reference for the application of an atomic gravimeter in a wider and more complex environment.

Schlagwörter

Stichwörter der Autor:innen

atomic gravimeterequilibrium optimizer algorithmtransfer functionvibration compensation

Autor:innen und Institutionen

  • School of Electrical Engineering, Naval University of Engineering, No.717 Jiefang Road, Wuhan 430033, China.

ORCID-Profile: Hao Che, Wenbin Gong

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Che, H., Li, A., Zhou, Z., Gong, W., Ma, J., & Qin, F. (2023). An Approach of Vibration Compensation for Atomic Gravimeter under Complex Vibration Environment. Sensors, 23(7), 3535. https://doi.org/10.3390/s23073535

Vancouver

Che H, Li A, Zhou Z, Gong W, Ma J, Qin F. An Approach of Vibration Compensation for Atomic Gravimeter under Complex Vibration Environment. Sensors. 2023;23(7):3535. doi:10.3390/s23073535

BibTeX
@article{Che2023,
  author = {Che, Hao and Li, An and Zhou, Zhu and Gong, Wenbin and Ma, Jinxiu and Qin, Fangjun},
  title = {An Approach of Vibration Compensation for Atomic Gravimeter under Complex Vibration Environment},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {7},
  pages = {3535},
  doi = {10.3390/s23073535}
}
Kostenlos starten →