Fabrication of High-Sensitivity Optical Fiber Sensor by an Improved Arc-Discharge Heating System
Sensors · 18.03.2023 · 23 (6) · 3238
DOI: 10.3390/s23063238 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 18.03.2023. Verfasst von Chao Ma und 2 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of In-Fiber Integrated Optics of Ministry of Education, College of Physics and Optoelectronic Engineering, Harbin Engineering Universi…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Bagui scholars Program of Guangxi Zhuang Autonomous Region.
Abstract (Originalsprache)
We proposed a high-sensitivity optical fiber sensor based on a dual-resonance helical long-period fiber grating (HLPG). The grating is fabricated in a single-mode fiber (SMF) by using an improved arc-discharge heating system. The transmission spectra and the dual-resonance characteristics of the SMF-HLPG near the dispersion turning point (DTP) were studied through simulation. In the experiment, a four-electrode arc-discharge heating system was developed. The system can keep the surface temperature of optical fiber relatively constant during the grating preparation process, which shows an advantage in preparing high-quality triple- and single-helix HLPGs. In particular, benefiting from this manufacturing system, the SMF-HLPG operating near the DTP was successfully prepared directly by arc-discharge technology, without secondary processing of the grating. As a typical application example of the proposed SMF-HLPG, physical parameters such as temperature, torsion, curvature and strain can be measured with high sensitivity by monitoring the variation of the wavelength separation in the transmission spectrum. Therefore, the proposed sensor and its fabrication technology have potential application prospects in practical sensing measurement.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of In-Fiber Integrated Optics of Ministry of Education, College of Physics and Optoelectronic Engineering, Harbin Engineering University, Harbin 150001, China.
- Photonics Research Center, School of Optoelectronic Engineering, Guilin University of Electronic Technology, Guilin 541004, China.
ORCID-Profile: Libo Yuan
Förderung
- National Natural Science Foundation of China
- Bagui scholars Program of Guangxi Zhuang Autonomous Region
Zitieren
APA
Ma, C., Wang, J., & Yuan, L. (2023). Fabrication of High-Sensitivity Optical Fiber Sensor by an Improved Arc-Discharge Heating System. Sensors, 23(6), 3238. https://doi.org/10.3390/s23063238
Vancouver
Ma C, Wang J, Yuan L. Fabrication of High-Sensitivity Optical Fiber Sensor by an Improved Arc-Discharge Heating System. Sensors. 2023;23(6):3238. doi:10.3390/s23063238
BibTeX
@article{Ma2023,
author = {Ma, Chao and Wang, Jian and Yuan, Libo},
title = {Fabrication of High-Sensitivity Optical Fiber Sensor by an Improved Arc-Discharge Heating System},
journal = {Sensors},
year = {2023},
volume = {23},
number = {6},
pages = {3238},
doi = {10.3390/s23063238}
}
EUVIMED