EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Implementation of an Integrated Control System for Omnidirectional Mobile Robots in Industrial Logistics

Ahmed Neaz, Sunyeop Lee, Kanghyun Nam

Sensors · 16.03.2023 · 23 (6) · 3184

DOI: 10.3390/s23063184 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 16.03.2023. Verfasst von Ahmed Neaz und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2020 Yeungnam University Research Grant, National Research Foundation of Korea (NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The integration of intelligent robots in industrial production processes has the potential to significantly enhance efficiency and reduce human adversity. However, for such robots to effectively operate within human environments, it is critical that they possess an adequate understanding of their surroundings and are able to navigate through narrow aisles while avoiding both stationary and moving obstacles. In this research study, an omnidirectional automotive mobile robot has been designed for the purpose of performing industrial logistics tasks within heavy traffic and dynamic environments. A control system has been developed, which incorporates both high-level and low-level algorithms, and a graphical interface has been introduced for each control system. A highly efficient micro-controller, namely myRIO, has been utilized as the low-level computer to control the motors with an appropriate level of accuracy and robustness. Additionally, a Raspberry Pi 4, in conjunction with a remote PC, has been utilized for high-level decision making, such as mapping the experimental environment, path planning, and localization, through the utilization of multiple Lidar sensors, IMU, and odometry data generated by wheel encoders. In terms of software programming, LabVIEW has been employed for the low-level computer, and the Robot Operating System (ROS) has been utilized for the design of the higher-level software architecture. The proposed techniques discussed in this paper provide a solution for the development of medium- and large-category omnidirectional mobile robots with autonomous navigation and mapping capabilities.

Schlagwörter

Stichwörter der Autor:innen

ROS and LabVIEW interaction 1SLAM 5autonomous robot 2control design with ROS 4industrial logistic robots 8integrated control system 7navigation with ROSnavigation with ROS 3omnidirectional mobile robot 6

Autor:innen und Institutionen

  • School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.

Förderung

  • 2020 Yeungnam University Research Grant
  • National Research Foundation of Korea (NRF)

Zitieren

APA

Neaz, A., Lee, S., & Nam, K. (2023). Design and Implementation of an Integrated Control System for Omnidirectional Mobile Robots in Industrial Logistics. Sensors, 23(6), 3184. https://doi.org/10.3390/s23063184

Vancouver

Neaz A, Lee S, Nam K. Design and Implementation of an Integrated Control System for Omnidirectional Mobile Robots in Industrial Logistics. Sensors. 2023;23(6):3184. doi:10.3390/s23063184

BibTeX
@article{Neaz2023,
  author = {Neaz, Ahmed and Lee, Sunyeop and Nam, Kanghyun},
  title = {Design and Implementation of an Integrated Control System for Omnidirectional Mobile Robots in Industrial Logistics},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {6},
  pages = {3184},
  doi = {10.3390/s23063184}
}
Kostenlos starten →