EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mass-Manufacturable 3D Magnetic Force Sensor for Robotic Grasping and Slip Detection

Théo Le Signor iD, Nicolas Dupré, Jeroen Didden, Eugene Lomakin, Gaël Close iD

Sensors · 10.03.2023 · 23 (6) · 3031

DOI: 10.3390/s23063031 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.03.2023. Verfasst von Théo Le Signor und 4 weiteren Autor:innen. Beteiligte Einrichtung: Melexis Technologies SA, CH-2022 Bevaix, Switzerland. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The manipulation of delicate objects remains a key challenge in the development of industrial robotic grippers. Magnetic force sensing solutions, which provide the required sense of touch, have been demonstrated in previous work. The sensors feature a magnet embedded within a deformable elastomer, which is mounted on top of a magnetometer chip. A key drawback of these sensors lies in the manufacturing process, which relies on the manual assembly of the magnet–elastomer transducer, impacting both the repeatability of measurements across sensors and the potential for a cost-effective solution through mass-manufacturing. In this paper, a magnetic force sensor solution is presented with an optimized manufacturing process that will facilitate mass production. The elastomer–magnet transducer was fabricated using injection molding, and the assembly of the transducer unit, on top of the magnetometer chip, was achieved using semiconductor manufacturing techniques. The sensor enables robust differential 3D force sensing within a compact footprint (5 mm × 4.4 mm × 4.6 mm). The measurement repeatability of these sensors was characterized over multiple samples and 300,000 loading cycles. This paper also showcases how the 3D high-speed sensing capabilities of these sensors can enable slip detection in industrial grippers.

Schlagwörter

Stichwörter der Autor:innen

force and tactile sensingmagnetic sensors

Autor:innen und Institutionen

  • Melexis Technologies SA, CH-2022 Bevaix, Switzerland.
  • Melexis Technologies NV, 3980 Tessenderlo, Belgium.

ORCID-Profile: Théo Le Signor, Gaël Close

Zitieren

APA

Le Signor, T., Dupré, N., Didden, J., Lomakin, E., & Close, G. (2023). Mass-Manufacturable 3D Magnetic Force Sensor for Robotic Grasping and Slip Detection. Sensors, 23(6), 3031. https://doi.org/10.3390/s23063031

Vancouver

Le Signor T, Dupré N, Didden J, Lomakin E, Close G. Mass-Manufacturable 3D Magnetic Force Sensor for Robotic Grasping and Slip Detection. Sensors. 2023;23(6):3031. doi:10.3390/s23063031

BibTeX
@article{LeSignor2023,
  author = {Le Signor, Théo and Dupré, Nicolas and Didden, Jeroen and Lomakin, Eugene and Close, Gaël},
  title = {Mass-Manufacturable 3D Magnetic Force Sensor for Robotic Grasping and Slip Detection},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {6},
  pages = {3031},
  doi = {10.3390/s23063031}
}
Kostenlos starten →