Testing and Evaluation of Wi-Fi RTT Ranging Technology for Personal Mobility Applications
Sensors · 05.03.2023 · 23 (5) · 2829
DOI: 10.3390/s23052829 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 05.03.2023. Verfasst von Manos Orfanos und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Rural, Surveying and Geoinformatics Engineering, National Technical University of Athens, 15780 Athens, Greece. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fundf Eastern Macedonia and Thrace, European Regional Development Fund.
Themen: Mobilisation
Abstract (Originalsprache)
The rapid growth in the technological advancements of the smartphone industry has classified contemporary smartphones as a low-cost and high quality indoor positioning tools requiring no additional infrastructure or equipment. In recent years, the fine time measurement (FTM) protocol, achieved through the Wi-Fi round trip time (RTT) observable, available in the most recent models, has gained the interest of many research teams worldwide, especially those concerned with indoor localization problems. However, as the Wi-Fi RTT technology is still new, there is a limited number of studies addressing its potential and limitations relative to the positioning problem. This paper presents an investigation and performance evaluation of Wi-Fi RTT capability with a focus on range quality assessment. A set of experimental tests was carried out, considering 1D and 2D space, operating different smartphone devices at various operational settings and observation conditions. Furthermore, in order to address device-dependent and other type of biases in the raw ranges, alternative correction models were developed and tested. The obtained results indicate that Wi-Fi RTT is a promising technology capable of achieving a meter-level accuracy for ranges both in line-of-sight (LOS) and non-line-of-sight (NLOS) conditions, subject to suitable corrections identification and adaptation. From 1D ranging tests, an average mean absolute error (MAE) of 0.85 m and 1.24 m is achieved, for LOS and NLOS conditions, respectively, for 80% of the validation sample data. In 2D-space ranging tests, an average root mean square error (RMSE) of 1.1m is accomplished across the different devices. Furthermore, the analysis has shown that the selection of the bandwidth and the initiator–responder pair are crucial for the correction model selection, whilst knowledge of the type of operating environment (LOS and/or NLOS) can further contribute to Wi-Fi RTT range performance enhancement.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Rural, Surveying and Geoinformatics Engineering, National Technical University of Athens, 15780 Athens, Greece.
- Department of Geodesy and Geoinformation, TU Wien-Vienna University of Technology, 1040 Vienna, Austria.
ORCID-Profile: Günther Retscher
Förderung
- European Regional Development Fundf Eastern Macedonia and Thrace
- European Regional Development Fund
Zitieren
APA
Orfanos, M., Perakis, H., Gikas, V., Retscher, G., Mpimis, T., Spyropoulou, I., & Papathanasopoulou, V. (2023). Testing and Evaluation of Wi-Fi RTT Ranging Technology for Personal Mobility Applications. Sensors, 23(5), 2829. https://doi.org/10.3390/s23052829
Vancouver
Orfanos M, Perakis H, Gikas V, Retscher G, Mpimis T, Spyropoulou I, et al. Testing and Evaluation of Wi-Fi RTT Ranging Technology for Personal Mobility Applications. Sensors. 2023;23(5):2829. doi:10.3390/s23052829
BibTeX
@article{Orfanos2023,
author = {Orfanos, Manos and Perakis, Harris and Gikas, Vassilis and Retscher, Günther and Mpimis, Thanassis and Spyropoulou, Ioanna and Papathanasopoulou, Vasileia},
title = {Testing and Evaluation of Wi-Fi RTT Ranging Technology for Personal Mobility Applications},
journal = {Sensors},
year = {2023},
volume = {23},
number = {5},
pages = {2829},
doi = {10.3390/s23052829}
}
EUVIMED