A Fabry–Perot Sensor with Cascaded Polymer Films Based on Vernier Effect for Simultaneous Measurement of Relative Humidity and Temperature
Sensors · 03.03.2023 · 23 (5) · 2800
DOI: 10.3390/s23052800 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 03.03.2023. Verfasst von Teng Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Precision Instrument and Opto-Electronics Engineering, Tianjin University, Tianjin 300072, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Tianjin, National Natural Science Foundation of China.
Abstract (Originalsprache)
In this paper, fiber sensor based on Vernier effect for simultaneous measurement of relative humidity (RH) and temperature is proposed. The sensor is fabricated by coating two kinds of ultraviolet (UV) glue with different refractive indexes (RI) and thicknesses on the end face of a fiber patch cord. The thicknesses of two films are controlled to generate the Vernier effect. The inner film is formed by a cured lower-RI UV glue. The exterior film is formed by a cured higher-RI UV glue, of which thickness is much thinner than the inner film. Through the analysis of the Fast Fourier Transform (FFT) of the reflective spectrum, the Vernier effect is formed by the inner lower-RI polymer cavity and the cavity composed of both polymer films. By calibrating the RH and temperature response of two peaks on the envelope of the reflection spectrum, simultaneous measurements of RH and temperature are realized by solving a set of quadratic equations. Experimental results show that the highest RH and temperature sensitivities of the sensor are 387.3 pm/%RH (in 20%RH to 90%RH) and −533.0 pm/°C (in 15 °C to 40 °C), respectively. The sensor has merits of low cost, simple fabrication, and high sensitivity, which makes it very attractive for applications that need to simultaneously monitor these two parameters.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Precision Instrument and Opto-Electronics Engineering, Tianjin University, Tianjin 300072, China.
- Key Laboratory of Opto-Electronics Information Technology of the Ministry of Education, Tianjin University, Tianjin 300072, China.
ORCID-Profile: Qun Han, Junfeng Jiang
Förderung
- National Key Research and Development Program of China
- Natural Science Foundation of Tianjin
- National Natural Science Foundation of China
Zitieren
APA
Zhang, T., Han, Q., Liang, Z., Jiang, J., & Cheng, Z. (2023). A Fabry–Perot Sensor with Cascaded Polymer Films Based on Vernier Effect for Simultaneous Measurement of Relative Humidity and Temperature. Sensors, 23(5), 2800. https://doi.org/10.3390/s23052800
Vancouver
Zhang T, Han Q, Liang Z, Jiang J, Cheng Z. A Fabry–Perot Sensor with Cascaded Polymer Films Based on Vernier Effect for Simultaneous Measurement of Relative Humidity and Temperature. Sensors. 2023;23(5):2800. doi:10.3390/s23052800
BibTeX
@article{Zhang2023,
author = {Zhang, Teng and Han, Qun and Liang, Zhizhuang and Jiang, Junfeng and Cheng, Zhenzhou},
title = {A Fabry–Perot Sensor with Cascaded Polymer Films Based on Vernier Effect for Simultaneous Measurement of Relative Humidity and Temperature},
journal = {Sensors},
year = {2023},
volume = {23},
number = {5},
pages = {2800},
doi = {10.3390/s23052800}
}
EUVIMED