EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calibration Methods for Time-to-Digital Converters

Wassim Khaddour iD, Wilfried Uhring iD, Foudil Dadouche iD, Norbert Dumas, Morgan Madec iD

Sensors · 03.03.2023 · 23 (5) · 2791

DOI: 10.3390/s23052791 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 03.03.2023. Verfasst von Wassim Khaddour und 4 weiteren Autor:innen. Beteiligte Einrichtung: ICube Research Institute, University of Strasbourg, CNRS, UMR 7357, 23 Rue du Loess, CEDEX, 67037 Strasbourg, France. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agence Nationale de la Recherche, Interreg, French National Research Agency (Agence Nationale de la Recherche ANR).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, two of the most common calibration methods of synchronous TDCs, which are the bin-by-bin calibration and the average-bin-width calibration, are first presented and compared. Then, an innovative new robust calibration method for asynchronous TDCs is proposed and evaluated. Simulation results showed that: (i) For a synchronous TDC, the bin-by-bin calibration, applied to a histogram, does not improve the TDC’s differential non-linearity (DNL); nevertheless, it improves its Integral Non-Linearity (INL), whereas the average-bin-width calibration significantly improves both the DNL and the INL. (ii) For an asynchronous TDC, the DNL can be improved up to 10 times by applying the bin–by-bin calibration, whereas the proposed method is almost independent of the non-linearity of the TDC and can improve the DNL up to 100 times. The simulation results were confirmed by experiments carried out using real TDCs implemented on a Cyclone V SoC-FPGA. For an asynchronous TDC, the proposed calibration method is 10 times better than the bin-by-bin method in terms of the DNL improvement.

Schlagwörter

Stichwörter der Autor:innen

asynchronous TDCaverage-bin-width calibrationbin-by-bin calibrationcalibration techniquesdifferential non-linearity (DNL)integral non-linearity (INL)matrix calibrationsynchronous TDCtime-to-digital converter (TDC)

Autor:innen und Institutionen

  • ICube Research Institute, University of Strasbourg, CNRS, UMR 7357, 23 Rue du Loess, CEDEX, 67037 Strasbourg, France.

ORCID-Profile: Wassim Khaddour, Wilfried Uhring, Foudil Dadouche, Morgan Madec

Förderung

  • Agence Nationale de la Recherche
  • Interreg
  • French National Research Agency (Agence Nationale de la Recherche ANR)
  • European Regional Development Fund
  • Interreg V Upper Rhine Offensive Sciences Program

Zitieren

APA

Khaddour, W., Uhring, W., Dadouche, F., Dumas, N., & Madec, M. (2023). Calibration Methods for Time-to-Digital Converters. Sensors, 23(5), 2791. https://doi.org/10.3390/s23052791

Vancouver

Khaddour W, Uhring W, Dadouche F, Dumas N, Madec M. Calibration Methods for Time-to-Digital Converters. Sensors. 2023;23(5):2791. doi:10.3390/s23052791

BibTeX
@article{Khaddour2023,
  author = {Khaddour, Wassim and Uhring, Wilfried and Dadouche, Foudil and Dumas, Norbert and Madec, Morgan},
  title = {Calibration Methods for Time-to-Digital Converters},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {5},
  pages = {2791},
  doi = {10.3390/s23052791}
}
Kostenlos starten →