EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Implementation of a Low-Cost Chlorophyll Content Meter

Zacharias Kamarianakis, Spyros Panagiotakis iD

Sensors · 01.03.2023 · 23 (5) · 2699

DOI: 10.3390/s23052699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 01.03.2023. Verfasst von Zacharias Kamarianakis und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical & Computer Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece. Hauptthemen laut MEDLINE: Chlorophyll, Plant Leaves. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chlorophyll meters are portable devices used to assess and improve plants’ nitrogen management and to help farmers in the determination of the health condition of plants through leaf greenness measurements. These optical electronic instruments can provide an assessment of chlorophyll content by measuring the light passing through a leaf or by measuring the light radiation reflected from its surface. However, independently of the main principle of operation and use (e.g., absorbance vs. reflectance measurements), commercial chlorophyll meters usually cost hundreds or even thousands of euros, making them inaccessible to growers and ordinary citizens who are interested in self-cultivation, farmers, crop researchers, and communities lacking resources in general. A low-cost chlorophyll meter based on light-to-voltage measurements of the remaining light after two LED light emissions through a leaf is designed, constructed, evaluated, and compared against two well-known commercial chlorophyll meters, the SPAD-502 and the atLeaf CHL Plus. Initial tests of the proposed device on lemon tree leaves and on young Brussels sprouts plant leaves revealed promising results compared to the commercial instruments. The coefficient of determination, R2, was estimated to be 0.9767 for the SPAD-502 and 0.9898 for the atLeaf-meter in lemon tree leaves samples compared to the proposed device, while for the Brussels sprouts plant, R2 was estimated to be 0.9506 and 0.9624, respectively. Further tests conducted as a preliminary evaluation of the proposed device are also presented.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ChlorophyllPlant LeavesNitrogen

Stichwörter der Autor:innen

3D printingArduinoSPADatLeafchlorophyll contentchlorophyll meterchlorophyll sensorlow-costportable devicesensor clip

Substanzen

ChlorophyllNitrogen

Autor:innen und Institutionen

  • Department of Electrical & Computer Engineering, Hellenic Mediterranean University, 71410 Heraklion, Greece.
  • Institute of Agri-Food and Life Sciences, University Research Center, Hellenic Mediterranean University, 71410 Heraklion, Greece.

ORCID-Profile: Spyros Panagiotakis

Zitieren

APA

Kamarianakis, Z., & Panagiotakis, S. (2023). Design and Implementation of a Low-Cost Chlorophyll Content Meter. Sensors, 23(5), 2699. https://doi.org/10.3390/s23052699

Vancouver

Kamarianakis Z, Panagiotakis S. Design and Implementation of a Low-Cost Chlorophyll Content Meter. Sensors. 2023;23(5):2699. doi:10.3390/s23052699

BibTeX
@article{Kamarianakis2023,
  author = {Kamarianakis, Zacharias and Panagiotakis, Spyros},
  title = {Design and Implementation of a Low-Cost Chlorophyll Content Meter},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {5},
  pages = {2699},
  doi = {10.3390/s23052699}
}
Kostenlos starten →