EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study on the Gas/Humidity Sensitivity of the High-Frequency SAW CO Gas Sensor Based on Noble-Metal-Modified Metal Oxide Film

Haiyang Yang, Bin Shen iD, Xinlei Liu, Chunbo Jin, Tianshun Zhou

Sensors · 23.02.2023 · 23 (5) · 2487

DOI: 10.3390/s23052487 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 23.02.2023. Verfasst von Haiyang Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Safety Engineering, Heilongjiang University of Science and Technology, Harbin 150022, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Heilongjiang province, post–doctoral funded projects in Heilongjiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to improve the response characteristics of the surface acoustic wave (SAW) sensor to trace gases, a SAW CO gas sensor based on a Pd–Pt/SnO2/Al2O3 film with a high-frequency response performance is proposed in this paper. The gas sensitivity and humidity sensitivity of trace CO gas are tested and analyzed under normal temperatures and pressures. The research results show that, compared with the frequency response of the Pd–Pt/SnO2 film, the CO gas sensor based on a Pd–Pt/SnO2/Al2O3 film has a higher frequency response performance, and the sensor has high-frequency response characteristics to CO gas with a concentration in the range of 10–100 ppm. The average response recovery time of 90% ranges from 33.4 s to 37.2 s, respectively. When the CO gas with a concentration of 30 ppm is tested repeatedly, its frequency fluctuation is less than 5%, indicating that the sensor has good stability. In the range of relative humidity (RH) from 25% to 75%, it also has high-frequency response characteristics for CO gas with a 20 ppm concentration.

Schlagwörter

Stichwörter der Autor:innen

CO gasPd–Pt/SnO2/Al2O3 thin filmSAWgas sensitivityhumidity sensitivity

Autor:innen und Institutionen

  • School of Safety Engineering, Heilongjiang University of Science and Technology, Harbin 150022, China.

ORCID-Profile: Bin Shen

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Heilongjiang province
  • post–doctoral funded projects in Heilongjiang Province
  • development of key technologies for coal mine fire prevention and major disaster monitoring

Zitieren

APA

Yang, H., Shen, B., Liu, X., Jin, C., & Zhou, T. (2023). A Study on the Gas/Humidity Sensitivity of the High-Frequency SAW CO Gas Sensor Based on Noble-Metal-Modified Metal Oxide Film. Sensors, 23(5), 2487. https://doi.org/10.3390/s23052487

Vancouver

Yang H, Shen B, Liu X, Jin C, Zhou T. A Study on the Gas/Humidity Sensitivity of the High-Frequency SAW CO Gas Sensor Based on Noble-Metal-Modified Metal Oxide Film. Sensors. 2023;23(5):2487. doi:10.3390/s23052487

BibTeX
@article{Yang2023,
  author = {Yang, Haiyang and Shen, Bin and Liu, Xinlei and Jin, Chunbo and Zhou, Tianshun},
  title = {A Study on the Gas/Humidity Sensitivity of the High-Frequency SAW CO Gas Sensor Based on Noble-Metal-Modified Metal Oxide Film},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {5},
  pages = {2487},
  doi = {10.3390/s23052487}
}
Kostenlos starten →