Design and Validation of a Custom-Made Hyperspectral Microscope Imaging System for Biomedical Applications
Sensors · 2023
DOI: 10.3390/s23052374 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, 2023. Verfasst von Jošt Stergar und 2 weiteren Autor:innen. Beteiligte Einrichtung: Jožef Stefan Institute, Jamova Cesta 39, SI-1000 Ljubljana, Slovenia. Hauptthemen laut MEDLINE: Microscopy, Hyperspectral Imaging. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research Agency.
Abstract (Originalsprache)
Hyperspectral microscope imaging (HMI) is an emerging modality that integrates spatial information collected by standard laboratory microscopy and the spectral-based contrast obtained by hyperspectral imaging and may be instrumental in establishing novel quantitative diagnostic methodologies, particularly in histopathology. Further expansion of HMI capabilities hinges upon the modularity and versatility of systems and their proper standardization. In this report, we describe the design, calibration, characterization, and validation of the custom-made laboratory HMI system based on a Zeiss Axiotron fully motorized microscope and a custom-developed Czerny-Turner-type monochromator. For these important steps, we rely on a previously designed calibration protocol. Validation of the system demonstrates a performance comparable to classic spectrometry laboratory systems. We further demonstrate validation against a laboratory hyperspectral imaging system for macroscopic samples, enabling future comparison of spectral imaging results across length scales. An example of the utility of our custom-made HMI system on a standard hematoxylin and eosin-stained histology slide is also shown.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Jožef Stefan Institute, Jamova Cesta 39, SI-1000 Ljubljana, Slovenia.
- Faculty of Mathematics and Physics, University of Ljubljana, Jadranska ulica 19, SI-1000 Ljubljana, Slovenia.
ORCID-Profile: Jošt Stergar, Matija Milanič
Förderung
- Slovenian Research Agency
Zitieren
APA
Stergar, J., Hren, R., & Milanič, M. (2023). Design and Validation of a Custom-Made Hyperspectral Microscope Imaging System for Biomedical Applications. Sensors. https://doi.org/10.3390/s23052374
Vancouver
Stergar J, Hren R, Milanič M. Design and Validation of a Custom-Made Hyperspectral Microscope Imaging System for Biomedical Applications. Sensors. 2023. doi:10.3390/s23052374
BibTeX
@article{Stergar2023,
author = {Stergar, Jošt and Hren, Rok and Milanič, Matija},
title = {Design and Validation of a Custom-Made Hyperspectral Microscope Imaging System for Biomedical Applications},
journal = {Sensors},
year = {2023},
doi = {10.3390/s23052374}
}
EUVIMED