Using Raw Accelerometer Data to Predict High-Impact Mechanical Loading
Sensors · 16.02.2023 · 23 (4) · 2246
DOI: 10.3390/s23042246 ↗Kurz gefasst
Fachartikel in der Zeitschrift Sensors, online erschienen am 16.02.2023. Verfasst von Lucas Veras und 9 weiteren Autor:innen. Beteiligte Einrichtung: Research Center in Physical Activity, Health and Leisure (CIAFEL), Faculty of Sport, University of Porto, 4200-450 Porto, Portugal. Hauptthemen laut MEDLINE: Acceleration, Accelerometry. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, Foundation for Science and Technology (FCT), European Regional Development Fund (ERDF).
Abstract (Originalsprache)
The purpose of this study was to develop peak ground reaction force (pGRF) and peak loading rate (pLR) prediction equations for high-impact activities in adult subjects with a broad range of body masses, from normal weight to severe obesity. A total of 78 participants (27 males; 82.4 ± 20.6 kg) completed a series of trials involving jumps of different types and heights on force plates while wearing accelerometers at the ankle, lower back, and hip. Regression equations were developed to predict pGRF and pLR from accelerometry data. Leave-one-out cross-validation was used to calculate prediction accuracy and Bland–Altman plots. Body mass was a predictor in all models, along with peak acceleration in the pGRF models and peak acceleration rate in the pLR models. The equations to predict pGRF had a coefficient of determination (R2) of at least 0.83, and a mean absolute percentage error (MAPE) below 14.5%, while the R2 for the pLR prediction equations was at least 0.87 and the highest MAPE was 24.7%. Jumping pGRF can be accurately predicted through accelerometry data, enabling the continuous assessment of mechanical loading in clinical settings. The pLR prediction equations yielded a lower accuracy when compared to the pGRF equations.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Center in Physical Activity, Health and Leisure (CIAFEL), Faculty of Sport, University of Porto, 4200-450 Porto, Portugal.
- Laboratory for Integrative and Translational Research in Population Health (ITR), University of Porto, 4200-450 Porto, Portugal.
- Obesity Integrated Responsability Unity (CRIO), São João Academic Medical Center, 4200-319 Porto, Portugal.
- Center of Research, Education, Innovation and Intervention in Sport (CIFI2D), Faculty of Sport, University of Porto, 4200-450 Porto, Portugal.
- Biomechanics Laboratory (LABIOMEP-UP), University of Porto, 4200-450 Porto, Portugal.
ORCID-Profile: Vítor Devezas, João Paulo Vilas-Boas, Leandro Machado, José Oliveira, Hélder Fonseca
Förderung
- Fundação para a Ciência e Tecnologia
- Foundation for Science and Technology (FCT)
- European Regional Development Fund (ERDF)
Zitieren
APA
Veras, L., Diniz-Sousa, F., Boppre, G., Devezas, V., Santos-Sousa, H., Preto, J., Vilas-Boas, J. P., Machado, L., Oliveira, J., & Fonseca, H. (2023). Using Raw Accelerometer Data to Predict High-Impact Mechanical Loading. Sensors, 23(4), 2246. https://doi.org/10.3390/s23042246
Vancouver
Veras L, Diniz-Sousa F, Boppre G, Devezas V, Santos-Sousa H, Preto J, et al. Using Raw Accelerometer Data to Predict High-Impact Mechanical Loading. Sensors. 2023;23(4):2246. doi:10.3390/s23042246
BibTeX
@article{Veras2023,
author = {Veras, Lucas and Diniz-Sousa, Florêncio and Boppre, Giorjines and Devezas, Vítor and Santos-Sousa, Hugo and Preto, John and Vilas-Boas, João Paulo and Machado, Leandro and Oliveira, José and Fonseca, Hélder},
title = {Using Raw Accelerometer Data to Predict High-Impact Mechanical Loading},
journal = {Sensors},
year = {2023},
volume = {23},
number = {4},
pages = {2246},
doi = {10.3390/s23042246}
}
EUVIMED