EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Detection of Wheel Polygonization Based on Wayside Monitoring and Artificial Intelligence

António Guedes, Ruben Silva iD, Diogo Ribeiro iD, Cecília Vale iD, Araliya Mosleh iD, Pedro Montenegro iD, Andreia Meixedo iD

Sensors · 15.02.2023 · 23 (4) · 2188

DOI: 10.3390/s23042188 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 15.02.2023. Verfasst von António Guedes und 6 weiteren Autor:innen. Beteiligte Einrichtung: CONSTRUCT-LESE, School of Engineering, Polytechnic of Porto, 4200-465 Porto, Portugal. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund (ERDF), national funds through the FCT/MCTES (PIDDAC), Agência Nacional de Inovação S.A..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research presents an approach based on artificial intelligence techniques for wheel polygonization detection. The proposed methodology is tested with dynamic responses induced on the track by passing a Laagrss-type rail vehicle. The dynamic response is attained considering the application of a train-track interaction model that simulates the passage of the train over a set of accelerometers installed on the rail and sleepers. This study, which considers an unsupervised methodology, aims to compare the performance of two feature extraction techniques, namely the Autoregressive Exogenous (ARX) model and Continuous Wavelets Transform (CWT). The extracted features are then submitted to data normalization considering the Principal Component Analysis (PCA) applied to suppress environmental and operational effects. Next to data normalization, data fusion using Mahalanobis distance is performed to enhance the sensitivity to the recognition of defective wheels. Finally, an outlier analysis is employed to distinguish a healthy wheel from a defective one. Moreover, sensitivity analysis is performed to analyze the influence of the number of sensors and their location on the accuracy of the wheel defect detection system.

Schlagwörter

Stichwörter der Autor:innen

automatic wheel defect detectiondynamic analysiswayside monitoring systemwheel polygonizationwheelset

Autor:innen und Institutionen

  • CONSTRUCT-LESE, School of Engineering, Polytechnic of Porto, 4200-465 Porto, Portugal.
  • CONSTRUCT-LESE, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal.

ORCID-Profile: Ruben Silva, Diogo Ribeiro, Cecília Vale, Araliya Mosleh, Pedro Montenegro, Andreia Meixedo

Förderung

  • European Regional Development Fund (ERDF)
  • national funds through the FCT/MCTES (PIDDAC)
  • Agência Nacional de Inovação S.A.

Zitieren

APA

Guedes, A., Silva, R., Ribeiro, D., Vale, C., Mosleh, A., Montenegro, P., & Meixedo, A. (2023). Detection of Wheel Polygonization Based on Wayside Monitoring and Artificial Intelligence. Sensors, 23(4), 2188. https://doi.org/10.3390/s23042188

Vancouver

Guedes A, Silva R, Ribeiro D, Vale C, Mosleh A, Montenegro P, et al. Detection of Wheel Polygonization Based on Wayside Monitoring and Artificial Intelligence. Sensors. 2023;23(4):2188. doi:10.3390/s23042188

BibTeX
@article{Guedes2023,
  author = {Guedes, António and Silva, Ruben and Ribeiro, Diogo and Vale, Cecília and Mosleh, Araliya and Montenegro, Pedro and Meixedo, Andreia},
  title = {Detection of Wheel Polygonization Based on Wayside Monitoring and Artificial Intelligence},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {4},
  pages = {2188},
  doi = {10.3390/s23042188}
}
Kostenlos starten →