EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Relief Modeling in the Restoration of Extractive Activities Using Drone Imagery

Erick Russell iD, Joan-Cristian Padró iD, Pau Montero, Cristina Domingo-Marimon iD, Vicenç Carabassa iD

Sensors · 13.02.2023 · 23 (4) · 2097

DOI: 10.3390/s23042097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 13.02.2023. Verfasst von Erick Russell und 4 weiteren Autor:innen. Beteiligte Einrichtung: Universitat Autònoma de Barcelona, E08193 Bellaterra (Cerdanyola del Vallès), Catalonia, Spain. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Government of Catalonia, European Union, GRUMETS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the field of mine engineering, a cross-section topographic survey is usually carried out to perform volumetric calculations of earth movement in order to restore areas affected by extractive activities. Nowadays, Remote Sensing and Geographical Information System (GIS) technologies make it possible to perform the same work by using indirect methods such as images obtained by photogrammetric flights. In this context, Unmanned Aerial Systems (UAS) are considered a very convenient option to develop mapping projects in short periods of time and to provide quality geospatial information such as Digital Elevation Models (DEM) and orthophotos of centimetric spatial resolution. In the present study, this approach has been applied in a gravel extraction area to obtain data for estimating the filling volume of material required for the restoration of the relief (DEM(r)). The estimation of the DEM(r) is later used to calculate a difference of height values (DEM(r)-DEM) that will serve as a variable in the basic operation of volume calculation. The novelty of the presented method is the simulation of a relief adapted to the surrounding morphology, including the derived channel network and the visibility impact, improving what would be a simple clogging. Likewise, the generation of 3D models allows visualizing a new morphological structure of the relief. The proposed approach, based on GIS tools, allows analyzing water flow connectivity integration of the DEM(r) with the environment and estimating potential landscape impacts from the main focuses of a visual basin, both of which are key aspects of restoration modeling that are not always properly addressed.

Schlagwörter

Stichwörter der Autor:innen

DEMdronesinterpolationminesmodelingphotogrammetryvisual basinwater flow

Autor:innen und Institutionen

  • Universitat Autònoma de Barcelona, E08193 Bellaterra (Cerdanyola del Vallès), Catalonia, Spain.
  • Departament de Geografía, Edifici B, Universitat Autònoma de Barcelona, E08193 Bellaterra (Cerdanyola del Vallès), Catalonia, Spain.
  • CREAF, E08193 Bellaterra (Cerdanyola del Vallès), Catalonia, Spain.
  • Grumets Research Group, CREAF, Edifici C, Universitat Autònoma de Barcelona, E08193 Bellaterra (Cerdanyola del Vallès), Catalonia, Spain.

ORCID-Profile: Erick Russell, Joan-Cristian Padró, Cristina Domingo-Marimon, Vicenç Carabassa

Förderung

  • Government of Catalonia
  • European Union
  • GRUMETS
  • European Union LIFE Preparatory project “New Life for Drylands”

Zitieren

APA

Russell, E., Padró, J. C., Montero, P., Domingo-Marimon, C., & Carabassa, V. (2023). Relief Modeling in the Restoration of Extractive Activities Using Drone Imagery. Sensors, 23(4), 2097. https://doi.org/10.3390/s23042097

Vancouver

Russell E, Padró JC, Montero P, Domingo-Marimon C, Carabassa V. Relief Modeling in the Restoration of Extractive Activities Using Drone Imagery. Sensors. 2023;23(4):2097. doi:10.3390/s23042097

BibTeX
@article{Russell2023,
  author = {Russell, Erick and Padró, Joan-Cristian and Montero, Pau and Domingo-Marimon, Cristina and Carabassa, Vicenç},
  title = {Relief Modeling in the Restoration of Extractive Activities Using Drone Imagery},
  journal = {Sensors},
  year = {2023},
  volume = {23},
  number = {4},
  pages = {2097},
  doi = {10.3390/s23042097}
}
Kostenlos starten →